PRT CTRL Integrated Controller Reference Manual

More documents

Recommendations

Info

To enter a value (0-65535), use the keypad as explained in section Entering Decimal Numbers on Page 405 and press [ENTER]. Setting a reporting ID of 00000 will result in the default reporting id being used for the service. Zone First Area Assignment The zone must be assigned to an area for it to perform any function in the system and a zone can be assigned in up to 4 different areas. A zone can perform a different function in each area. For example a zone can be a delay zone in one area and an instant zone in another. CP001:01 Area 1 None Use the [1] and [3] keys to scroll the available areas that can be assigned to the zone. For more information about the list control data entry refer to the section List Control Data Entry on Page 406. Zone Type First Area Assignment When a zone is assigned to an area the zone must be programmed with the type of zone (Delay, 24HR etc). The Protégé System has twelve predefined zone types as well as user definable zone types. CP001:01 Type 1 None Use the [1] and [3] keys to scroll the available zone types that can be assigned to the zone. For more information about the list control data entry refer to the section List Control Data Entry on Page 406. Zone Second Area Assignment The zone must be assigned to an area for it to perform any function in the system and a zone can be assigned in up to 4 different areas. A zone can perform a different function in each area. For example a zone can be a delay zone in one area and an instant zone in another. CP001:01 Area 2 None Use the [1] and [3] keys to scroll the available areas that can be assigned to the zone. For more information about the list control data entry refer to the section List Control Data Entry on Page 406. Zone Type Second Area Assignment When a zone is assigned to an area the zone must be programmed with the type of zone (Delay, 24HR etc). The Protégé System has twelve predefined zone types as well as user definable zone types. CP001:01 Type 2 None 125 Protégé Integrated System Controller Reference Manual
Use the [1] and [3] keys to scroll the available zone types that can be assigned to the zone. For more information about the list control data entry refer to the section List Control Data Entry on Page 406. Zone Third Area Assignment The zone must be assigned to an area for it to perform any function in the system and a zone can be assigned in up to 4 different areas. A zone can perform a different function in each area. For example a zone can be a delay zone in one area and an instant zone in another. CP001:01 Area 3 None Use the [1] and [3] keys to scroll the available areas that can be assigned to the zone. For more information about the list control data entry refer to the section List Control Data Entry on Page 406. Zone Type Third Area Assignment When a zone is assigned to an area the zone must be programmed with the type of zone (Delay, 24HR etc). The Protégé System has twelve predefined zone types as well as user definable zone types. CP001:01 Type 3 None Use the [1] and [3] keys to scroll the available zone types that can be assigned to the zone. For more information about the list control data entry refer to the section List Control Data Entry on Page 406. Zone Fourth Area Assignment The zone must be assigned to an area for it to perform any function in the system and a zone can be assigned in up to 4 different areas. A zone can perform a different function in each area. For example a zone can be a delay zone in one area and an instant zone in another. CP001:01 Area 4 None Use the [1] and [3] keys to scroll the available areas that can be assigned to the zone. For more information about the list control data entry refer to the section List Control Data Entry on Page 406. Zone Type Fourth Area Assignment When a zone is assigned to an area the zone must be programmed with the type of zone (Delay, 24HR etc). The Protégé System has twelve predefined zone types as well as user definable zone types. CP001:01 Type 4 None Protégé Integrated System Controller Reference Manual 126
Page 1 and 2:
Integrated Access Control Alarm Man
Page 3 and 4:
PREFACE Copyright Notice © Copyrig
Page 5 and 6:
Access Level 2,3 and 4.............
Page 7 and 8:
Reader Port 1 Reader Type..........
Page 9 and 10:
Code Delay Time....................
Page 11 and 12:
PGM Number 5 In PGM Group .........
Page 13 and 14:
ModBUS Door Control Group..........
Page 15 and 16:
Programmable Function Configuration
Page 17 and 18:
Automation.........................
Page 19 and 20:
16 Zone Expander...................
Page 21 and 22:
Contact ...........................
Page 23 and 24:
The Protégé System Management Sui
Page 25 and 26:
Reference Manual Version This manua
Page 27 and 28:
4. Reader Expander 2. Zones 1. Zone
Page 29 and 30:
MENU 4 INSTALLER MENU 4,1 MODULE PR
Page 31 and 32:
The ability to limit the area's tha
Page 33 and 34:
*Area 001 is DISARMED • From the
Page 35 and 36:
*Area 001 24HR Busy • When the en
Page 37 and 38:
• When the area group arming proc
Page 39 and 40:
Area Busy To prevent an area from a
Page 41 and 42:
It is recommended to change the Mas
Page 43 and 44:
Use this feature to program cards f
Page 45 and 46:
Use the numerical keys to enter a v
Page 47 and 48:
UN00001 Misc [1-34----] To modify o
Page 49 and 50:
Option 1 - User Area is a Group Whe
Page 51 and 52:
To scroll menu groups by name use t
Page 53 and 54:
Option 7 - Bypass Zone Menu When e
Page 55 and 56:
To modify options, follow the setti
Page 57 and 58:
AG001 Name All Areas To scroll area
Page 59 and 60:
Door Group Name If the selected doo
Page 61 and 62:
DG001 Door to modify: DR001 Type th
Page 63 and 64:
Area Arming Group An access level t
Page 65 and 66:
Disabled the access level PGM will
Page 67 and 68:
Elevator Groups To access the eleva
Page 69 and 70:
7 8 9 10 11 12 13 14 15 16 041 042
Page 71 and 72:
The following table shows the relat
Page 73 and 74:
Wed 19:56:50 Use r Master At KP00
Page 75 and 76: • Pressing the [] key once more w
Page 77 and 78: When programming modules some optio
Page 79 and 80: KP001 Menu Grp None Use the [1] and
Page 81 and 82: Enabled the keypad will lockout any
Page 83 and 84: defer warning keypad group. Disabl
Page 85 and 86: Option 3 - Event Review Menu Enabl
Page 87 and 88: To enter a polling time (008 to 250
Page 89 and 90: 11-14-72-B9 Serial Number of the re
Page 91 and 92: When programming modules some optio
Page 93 and 94: Enabled the high current charging o
Page 95 and 96: Reader Port 1 Reading Format The re
Page 97 and 98: ABA Card T2 NCS 29 Bit HID 26/34 Bi
Page 99 and 100: RD001 R1 Key Md None Use the [1] an
Page 101 and 102: Disabled the reader performs no act
Page 103 and 104: Disabled the reader will not perfor
Page 105 and 106: It is recommended not to enable/dis
Page 107 and 108: RD001 R2 Mode Access Use the [1] an
Page 109 and 110: Use the [1] and [3] keys to scroll
Page 111 and 112: Enabled the reader will activate th
Page 113 and 114: Enabled the reader expander will ac
Page 115 and 116: Option 2 - Disable Red LED Processi
Page 117 and 118: Analog Expander To access the Analo
Page 119 and 120: For UL and cUL listed installations
Page 121 and 122: e sent in various incremental value
Page 123 and 124: Every time you press the Enter key,
Page 125: Zone Special Options Special option
Page 129 and 130: Zone Restore Zone Speed This determ
Page 131 and 132: When enabled the zone will be preve
Page 133 and 134: Trouble Zone Reporting Id The Troub
Page 135 and 136: CP001:01 Area 4 None Use the [1] an
Page 137 and 138: Automation Control Point An automat
Page 139 and 140: Enabled the zone type will generate
Page 141 and 142: Option 8 - Activate Entry PGM For B
Page 143 and 144: Enabled the zone type will deactiva
Page 145 and 146: Option 1 - Always Log Zone Event E
Page 147 and 148: PGM OUTPUTS Introduction PGM's are
Page 149 and 150: CP001:01 Misc [--------] To modify
Page 151 and 152: AREA Introduction An installation m
Page 153 and 154: Intelligent False Alarm Prevention
Page 155 and 156: user count goes down. The count is
Page 157 and 158: AR001 Bell time: 000 off To modify
Page 159 and 160: Armed PGM Pulse ON Time The armed P
Page 161 and 162: To modify the pulse on time (000 to
Page 163 and 164: AR001 Count time: 000 on To modify
Page 165 and 166: AR001 Lock Dr Gp None Use the [1] a
Page 167 and 168: Disabled the child area will not be
Page 169 and 170: Enabled the area will report the ac
Page 171 and 172: Enabled the area will not activate
Page 173 and 174: ACCESS CONTROL Introduction To acce
Page 175 and 176: DR001 Slave None Use the [1] and [3
Page 177 and 178:
Door Lock PGM or PGM Group You can
Page 179 and 180:
Forced Open PGM Pulse ON Time The f
Page 181 and 182:
To modify options, use the keypad a
Page 183 and 184:
Enabled the door will prevent any e
Page 185 and 186:
Secondary Door Type The secondary d
Page 187 and 188:
Miscellaneous Options Miscellaneous
Page 189 and 190:
Reader Expander The reader expander
Page 191 and 192:
Floor Unlock late to open will only
Page 193 and 194:
GROUP Introduction Groups of object
Page 195 and 196:
To modify the PGM item 4 entry, use
Page 197 and 198:
Use the [1] and [3] keys to scroll
Page 199 and 200:
REPORTING Introduction The reportin
Page 201 and 202:
Contact ID Monitor Phone Protégé
Page 203 and 204:
Service Mode The service mode deter
Page 205 and 206:
Option 2 - DTMF Tone / Pulse Dialin
Page 207 and 208:
Option 1 - Service Used For Back Up
Page 209 and 210:
eporting paths that potentially can
Page 211 and 212:
for a list of trouble zones refer t
Page 213 and 214:
SV001 Rings to answer: 008 To modif
Page 215 and 216:
SV001 Report Opt [-2------] To modi
Page 217 and 218:
SV001 Server port: 10002 To modify
Page 219 and 220:
Page 221 and 222:
screen. The SIA service comprises o
Page 223 and 224:
Dial Options The dial options confi
Page 225 and 226:
Reserved. It is recommended not to
Page 227 and 228:
Page 229 and 230:
SV001 Ser Type AMX Use the [1] and
Page 231 and 232:
SV001 Events [123456--] To modify o
Page 233 and 234:
Reserved. Reserved. It is recommen
Page 235 and 236:
controller is reset or restarts. Ma
Page 237 and 238:
Enabled the service will use the re
Page 239 and 240:
Page 241 and 242:
If the PCI fails to reply to a comm
Page 243 and 244:
Communications Port Number The comm
Page 245 and 246:
SV001 Intercom 3 address: 255 To mo
Page 247 and 248:
SV001 Access pgm: --000:00 To modif
Page 249 and 250:
Service Mode The service mode deter
Page 251 and 252:
To modify the IP address use the ke
Page 253 and 254:
Disabled the dialer will not report
Page 255 and 256:
To modify the line number, use the
Page 257 and 258:
PGM Mapping Start The PGM mapping s
Page 259 and 260:
SV001 Com port: 09647 To modify the
Page 261 and 262:
Selecting a Telephone Number to Mod
Page 263 and 264:
Dial Attempt Phone Number Dialed Re
Page 265 and 266:
8 Phone Number 1 Fail (Trouble Zone
Page 267 and 268:
RD061 S:AC92B39D Next module ? The
Page 269 and 270:
Each module will be programmed with
Page 271 and 272:
• Pressing the [ENTER] key the ke
Page 273 and 274:
Select zone to view: CP001:01 Type
Page 275 and 276:
Bell 1 Siren is OFF Use the [] and
Page 277 and 278:
• When the [ENTER] key is pressed
Page 279 and 280:
Area Control RTHP Control Floor Tem
Page 281 and 282:
will not be modified further from t
Page 283 and 284:
Output PGM / Memory Register Output
Page 285 and 286:
Input One Area Control DISARM Input
Page 287 and 288:
Fire PGM To modify the fault PGM, u
Page 289 and 290:
Heating Stage 3 PGM The heat 3 PGM
Page 291 and 292:
7 Fresh Air Cooling Set Point If th
Page 293 and 294:
dehumidification. 5 On Call For Spa
Page 295 and 296:
FN001 Fresh temp reg: 00000 To modi
Page 297 and 298:
Forward PGM The forward PGM is used
Page 299 and 300:
modes. 4 Current Floor Tempering Mo
Page 301 and 302:
Page 303 and 304:
Base Register Configuration Registe
Page 305 and 306:
Stage 1 PGM The first PGM in the 8
Page 307 and 308:
Page 309 and 310:
Control Door Group The control door
Page 311 and 312:
Rex Zone Input The Request to Exit
Page 313 and 314:
To modify the pre alarm PGM or PGM
Page 315 and 316:
FN001 Func Type Elevator Ctrl Use t
Page 317 and 318:
FN001 Input one pgm: --000:00 To mo
Page 319 and 320:
FN001 Func Mode Normal Use the [1]
Page 321 and 322:
GENERAL PROGRAMMING Introduction Th
Page 323 and 324:
Switching and Load Control applicat
Page 325 and 326:
that a service that uses the settin
Page 327 and 328:
numbers below 10 hours. Example 09:
Page 329 and 330:
To modify the panel IP gateway use
Page 331 and 332:
Disabled the system controller will
Page 333 and 334:
Language English Use the [1] and [3
Page 335 and 336:
CF001 Site End bits: 008 To modify
Page 337 and 338:
CF001 Set Bit 1 bit: 255 To modify
Page 339 and 340:
pressed to view the exact details o
Page 341 and 342:
• Select the bypass zone view men
Page 343 and 344:
Use the [] and [] keys to scroll th
Page 345 and 346:
Setting the System Time The time se
Page 347 and 348:
By default the schedule name will b
Page 349 and 350:
Disabled the period will not operat
Page 351 and 352:
Holiday to modify: HL001 Every time
Page 353 and 354:
Option 8 - Holiday Group Eight Ena
Page 355 and 356:
Protégé Integrated System Control
Page 357 and 358:
• Pressing the [2] key will remov
Page 359 and 360:
To activate the Test Zone select [M
Page 361 and 362:
Keypad Zones The keypad will report
Page 363 and 364:
CP001:15 330 (Expansion Card Proble
Page 365 and 366:
16 PGM Output Expander The 16 PGM o
Page 367 and 368:
ZX001:01 130 (Burglary) 041 ZX001:0
Page 369 and 370:
Keypad Zones The keypad will report
Page 371 and 372:
Analog Input/Output Expander The An
Page 373 and 374:
RD001:02 BA BR 1042 RD001:03 BA BR
Page 375 and 376:
ZX001:15 YP YQ 6103 ZX001:16 YP YQ
Page 377 and 378:
Keypad Zones Zone Number Alarm Code
Page 379 and 380:
Keypad Zones CP001:03 3D (YT) BD (Y
Page 381 and 382:
RD002:16 38 (UT) B8 (UJ) 0804 RD003
Page 383 and 384:
Quick Arming/Disarming. Used to rep
Page 385 and 386:
Code Code Code 0 Medical Alarm MA M
Page 387 and 388:
GG XYZ S Group or Partition (Area)
Page 389 and 390:
TROUBLE ZONE MAPS Introduction Foll
Page 391 and 392:
ZXxxx:07 Bell 1 Over Current Bell/P
Page 393 and 394:
PROFILES Introduction Profiles are
Page 395 and 396:
Phone Numbers 16 Schedules 248 Holi
Page 397 and 398:
16 Zone Input Expanders (PRT-ZX16 a
Page 399 and 400:
Elevator Names 8 Elevator Floor Gro
Page 401 and 402:
Automation Points 8 Panel Configura
Page 403 and 404:
OBJECT NOTATION Introduction When s
Page 405 and 406:
FGT PMT FLT ELT Floor Group Name Pa
Page 407 and 408:
If you have not moved off the scree
Page 409 and 410:
Hexadecimal Data Entry Hexadecimal
Page 411 and 412:
1. Set battery charge 700mA: N To c
Page 413 and 414:
CONVERSION Introduction When progra
Page 415 and 416:
DLE 016 10 P 80 50 DC1 017 11 Q 81
Page 417 and 418:
NOTES _____________________________
Page 419:
NOTES _____________________________
show all

PRT CTRL Integrated Controller Reference Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?