PRT CTRL Integrated Controller Reference Manual

Every time you press the Enter key, the next screen appears. The different screens are
described in the following sub-sections. Programming zones allows you to configure which
zones belong in to areas and the options used when the zone is activated.
When programming zones some options are processed at the module, for these options to
operate correctly a network update must be performed and the device that the zone is located
on must be registered and online.
Updating modules can be accessed by selecting [MENU, 4, 8, 1, 3], you can also check the
status of your modules by selecting [MENU, 4, 8, 1, 1] for all modules presently offline and
[MENU, 4, 8, 1, 2] for all online modules. For more information refer to the Advanced Menu
Section on Page 265.
Selecting a Zone to Modify
Each zone is assigned a unique identification that uses the Protégé Notation.
Select zone to
modify: CP001:01
Type the appropriate module type, module address and zone number or use the [] and []
keys to scroll the available zones. When the desired zone number appears on the screen,
press [ENTER] to program the selected zone number.
Zone Name
If the selected zone has a name associated (some zones do not have a name associated with
them) the name programming screen will be shown.
CP001:01 Name
*Zone CP001:01
To scroll zones by name use the [] and [] keys. To modify or enter a new name for the
selected zone use the keypad as explained in section Entering Text and Names on Page 406
and press [ENTER].
By default the zone name will be prefixed by an '*' this indicates that the name is an editable
name in the system.
Zone Miscellaneous Options
Miscellaneous options for the zone include the configuration of event logging, bypass and
arming configurations for the zone.
CP001:01 Misc
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Log Zone Event
Enabled the zone will generate an event whenever it is opened, closed,
tampered or shorted.
Protégé Integrated System Controller Reference Manual
122