PRT CTRL Integrated Controller Reference Manual

e sent in various incremental values. As many elements that are monitored by sensors
operate slowly we recommend using the longest times possible. This also reduces the risk of
disturbances due to interference as the input is averaged over the period of time being
sampled.
AE001 Ch 1 Time
30 Secs
Use the [1] and [3] keys to scroll the channel time settings. For more information about the
list control data entry refer to the section List Control Data Entry on Page 406.
Analog Channel 1 Differentiate On Send Value
The value that is configured is constantly monitored against the last value that is sent to the
system controller and if a change has occurred greater than the amount programmed and
differentiate on send option is enabled the channel will send an update and start the
comparison process again.
The value that is programmed is an offset of the raw input value to the analog expansion
module device. The last sent value is retained and any input is sampled and averaged before
being compared to the differentiate value.
AE001 Ch 1 diff
value: 000
To enter a value (0-255), use the keypad as explained in section Entering Decimal Numbers
on Page 405 and press [ENTER].
Programming Analog Channel 2, 3 and 4
The programming screens for channels 2, 3 and 4 are identical to channel one and you will be
prompted with each channel screen as you press the [ENTER] key. Each channel operates
independently of each other.
Protégé Integrated System Controller Reference Manual
120