PRT CTRL Integrated Controller Reference Manual

Option 2 – Disable Red LED Processing
Enabled the reader expander will not control the Red LED (L2) and the PGM
can be used for another function, this is particularly useful if the attached
proximity reader LED’s is controlled with one wire.
Disabled the reader will turn on the Red LED when the door is locked.
Option 3 – Disable Green LED Processing
Enabled the reader expander will not control the Green LED (L1) and the
PGM can be used for another function, this is particularly useful if the
attached proximity reader LED’s is controlled with one wire.
Disabled the reader will turn on the Green LED when the door is unlocked.
Option 4 – Disable Buzzer Processing
Enabled the reader expander will not control the Buzzer Output (BZ) and
the PGM can be used for another function.
Disabled the reader will control the buzzer output.
Option 5 - 8 - Reserved
Reserved.
Reserved.
Reader Port 2 Elevator Options
Options that relate to the elevator functions.
RD001 R2 Elv Opt
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 – Invert Floor Relays
Enabled the reader expander will invert all the relays on the PX16’s
connected that are used for elevator control.
Disabled the reader will not invert the relays.
Option 2 – Control on Comm Fail
Enabled the PX16 used for elevator control will control the state of the
relays when they go offline. Option 3 determines the state the relays will
go into.
Disabled the PX16 used for elevator control will not change the state of the
relays when they go offline..
Option 3 – Activate on Comm Fail
Protégé Integrated System Controller Reference Manual
114