PRT CTRL Integrated Controller Reference Manual

Disabled bond sensing will operate normally.
Option 4 - Invert Request to Exit Input
Enabled the reader will invert the request to exit input.
Disabled REX input will operate normally.
Option 5 - Invert Request to Enter Input
Enabled the reader will invert the request to enter input.
Disabled REN input will operate normally.
Option 6 - Request To Exit Operates Always
Enabled the reader will always allow a request to exit event EVEN if the door
is forced open. This will not restart the forced door or the door alarm
operation.
Disabled REX input will operate only when the door is closed.
Option 7 - Recycle Door Open Too Long Timer On Request To Exit Operation
Enabled the reader will extend the door open time when the REX is
received. The REX must be received during the normal open time or during
the pre-alarm time for the timer to be recycled. Pressing the request to exit
once the door open too long has been entered will require the door to be
closed. This option will not affect the ability for the request to exit action to
unlock the door.
Disabled REX input will not alter the door open time once the door as been
opened.
Option 8 - Reserved
Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Reader Port 2 Process Options
Options that relate to the extra reader functions.
RD001 R2 Process
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 – Convert Force to Door Open
Enabled the reader expander will process door forced open events as door
open events.
Disabled the reader will process forced door events as normal.
113 Protégé Integrated System Controller Reference Manual