PRT CTRL Integrated Controller Reference Manual

Enabled the reader expander will activate the PGM assigned to the users
access level that gained access to the door or reader.
The user must have the allow access level PGM option enabled.
Disabled the reader will not perform any action on the access level PGM.
Option 7 - Display Card Data
Enabled the reader expander will display the actual card data received from
the reader when the card number is not known. This can be used to
interface with custom third party applications that require their own
processing of card information.
Disabled the reader will display the card number not found message.
Option 8 - Arm User Area
Enabled the reader will arm the user's area when they perform a dual
presentation of their card to the associated reader. The users area must still
be available in the user area group assigned to the users access level for
this to correctly operate.
Disabled the reader will not perform any user area arming functions.
It is recommended not to enable/disable or modify the settings of reserved options.
Reader Port 2 Extra Options
Options that relate to the extra reader functions.
RD001 R2 Extra
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Entry Blocked Beam Input
Enabled the reader expander will process the sense input for beam control.
Beam control allows the reader expander to control a automatic gate that
must have it's contacts held open in the even the pathway is blocked.
Disabled the reader will not perform beam processing.
Option 2 - Invert Door Contacts
When the option is enabled the door contact input is inverted. This does not
affect the zone input functionality if it is being used.
Disabled door contact functions normally.
Option 3 - Invert Bond Sensing Input
Enabled the reader will invert the bond sensing input.
Protégé Integrated System Controller Reference Manual
112