PRT CTRL Integrated Controller Reference Manual

Reader Port 1 Elevator Options
Options that relate to the elevator functions.
RD001 R1 Elv Opt
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 – Invert Floor Relays
Enabled the reader expander will invert all the relays on the PX16’s
connected that are used for elevator control.
Disabled the reader will not invert the relays.
Option 2 – Control on Comm Fail
Enabled the PX16 used for elevator control will control the state of the
relays when they go offline. Option 3 determines the state the relays will
go into.
Disabled the PX16 used for elevator control will not change the state of the
relays when they go offline..
Option 3 – Activate on Comm Fail
Enabled the PX16 will activate the relays when they go offline.
Disabled the PX16’s will deactivate the relays when they go offline.
Option 4 - 8 - Reserved
Reserved.
Reserved.
Reader Port 1 Function PGM
You can assign a PGM or PGM group that is used by the multiple badge options.
RD001 R1 Func
pgm: --000:00
To modify the PGM or PGM Group, use the settings as explained in section Entering PGM and
PGM Groups on Page 410.
Reader Port 2 Mode
The reader mode setting determines what function the reader attached to port two will
perform.
105 Protégé Integrated System Controller Reference Manual