PRT CTRL Integrated Controller Reference Manual

Disabled the reader performs no action when a card is presented and the
door is unlocked or open.
Option 2 - Send Door Monitoring Events
Enabled the reader will send door events when the door input is opened or
closed. This is enabled by default but should be disabled on at least one
reader port if both reader ports are controlling the same door (ENTRY and
EXIT access control).
Disabled the reader expander will not send any door events.
Option 3 - LED Follow Lock Status
Enabled the reader will activate the LED outputs on the reader expander
when the lock is opened. This option DOES not prevent the outputs from
being used to display the area armed or alarm status.
Disabled the reader will not perform any function on the LED outputs.
Option 4 - Bond Sense Input Enable
Enabled the magnetic bond sense functions. The magnetic bond sense is a
contact that indicates if the magnetic bond between the electromagnet and
the clamp is complete. It is used when a separate door contact and bond
sense input are to be used however the generation of door events should be
processed using both inputs.
When opening either of the two contacts open (Door Contact or Bond Sense
Input) the door monitoring will see this as the door being opened and
process it accordingly.
Disabled the reader will not include the bond sense input in the door status
processing.
Option 5 - Request To Exit (REX) Enabled
Enabled the reader expander will generate request to exit events from the
REX input on the reader expander.
Disabled the keypad will not generate any REX events.
Option 6 - Request To Enter (REN) Enabled
Enabled the reader expander will generate request to enter events from the
REN input on the reader expander.
Disabled no action will be taken for the Request To Enter function.
Option 7 - Generate Format Error Events
Enabled the reader expander will send a detailed format error to the system
controller if it receives information from the reader that does not comply
with the programmed format. Format errors include bit count, byte count,
parity, checksum and LRC calculation failures.
Protégé Integrated System Controller Reference Manual
100