Quickview 300 Product Manual PATA - Seagate
Quickview 300 Product Manual PATA - Seagate
Quickview 300 Product Manual PATA - Seagate
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Product</strong> Specifications<br />
4.6 Power Mode Definitions<br />
Spin-up<br />
The drive is spinning up following initial application of power and has<br />
not yet reached full speed.<br />
Seek<br />
A random access operation by the drive.<br />
Read/Write<br />
Data is being read from or written to the drive.<br />
Idle<br />
The drive is spinning, the actuator is parked and powered off and all<br />
other circuitry is powered on.<br />
The drive is capable of responding to read commands within 40 ms.<br />
Standby<br />
The motor is not spinning. The drive will leave this mode upon receipt<br />
of a command that requires disk access. The time-out value for this<br />
mode is programmable. The buffer is active to accept write data.<br />
Sleep<br />
This is the lowest power state – with the interface set to inactive. A<br />
software or hardware reset is required to return the drive to the Standby<br />
state.<br />
4.7 EPA Energy Star Compliance<br />
Maxtor Corporation supports the goals of the U.S. Environmental<br />
Protection Agency’s Energy Star program to reduce the electrical power<br />
consumption of computer equipment.<br />
<strong>Quickview</strong> <strong>300</strong> 80/100/120/160/200/250/<strong>300</strong>GB <strong>PATA</strong> 4-5
Change language