Quickview 300 Product Manual PATA - Seagate
Quickview 300 Product Manual PATA - Seagate
Quickview 300 Product Manual PATA - Seagate
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation<br />
3.6.1.1 Connecting the Adapter Board and the Drive<br />
Use a 40-pin cable to connect the drive to the board.<br />
See figure 3-8 to connect the drive to the board:<br />
1. Insert the 80-pin conductor cable into the mating connector of the adapter<br />
board. Make sure that pin 1 of the connector matches with pin 1 on the<br />
cable.<br />
2. Insert the other end of the cable into the header on the drive.<br />
When inserting this end of the cable, make sure that pin 1 of the<br />
cable connects to pin 1 of the drive connector.<br />
Figure 3-8 Drive Power Supply and <strong>PATA</strong> Bus Interface Cables<br />
<strong>Quickview</strong> <strong>300</strong> 80/100/120/160/200/250/<strong>300</strong>GB <strong>PATA</strong> 3-15
Change language