Quickview 300 Product Manual PATA - Seagate
Quickview 300 Product Manual PATA - Seagate
Quickview 300 Product Manual PATA - Seagate
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation<br />
3.2 UNPACKING INSTRUCTIONS<br />
CAUTION:<br />
The maximum limits for physical shock can be exceeded if the<br />
drive is not handled properly. Special care should be<br />
taken not to bump or drop the drive. It is highly recommended<br />
that Maxtor <strong>Quickview</strong> <strong>300</strong> drives are not stacked or placed on<br />
any hard surface after they are unpacked. Such handling could<br />
cause media damage.<br />
1. Open the shipping container and remove the packing assembly<br />
that contains the drive.<br />
2. Remove the drive from the packing assembly.<br />
CAUTION:<br />
During shipment and handling, the antistatic electrostatic discharge<br />
(ESD) bag prevents electronic component<br />
damage due to electrostatic discharge. To avoid accidental damage<br />
to the drive, do not use a sharp instrument to open the ESD<br />
bag and do not touch PCB components. Save the packing materials<br />
for possible future use.<br />
3. When you are ready to install the drive, remove it from the ESD<br />
bag.<br />
3-2 <strong>Quickview</strong> <strong>300</strong> 80/100/120/160/200/250/<strong>300</strong>GB <strong>PATA</strong>
Change language