Quickview 300 Product Manual PATA - Seagate
Quickview 300 Product Manual PATA - Seagate
Quickview 300 Product Manual PATA - Seagate
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Introduction<br />
1.3 MANUAL ORGANIZATION<br />
This manual is organized into the following chapters:<br />
• Chapter 1 – Introduction<br />
• Chapter 2 – General Description<br />
• Chapter 3 – Installation<br />
• Chapter 4 – <strong>Product</strong> Specifications<br />
• Chapter 5 – ATA Bus Interface and ATA Commands<br />
• Chapter 6 – Service and Support<br />
1.4 TERMINOLOGY AND CONVENTIONS<br />
In the Glossary at the back of this manual, you can find definitions for<br />
many of the terms used in this manual. In addition, the following<br />
abbreviations are used in this manual:<br />
• ASIC application-specific integrated circuit<br />
• ATA advanced technology attachment<br />
• Bels sound power units<br />
• bpi bits per inch<br />
• DA Double Amplitude(represents pk-pk shaker<br />
displacement)<br />
• dB decibels<br />
• dBA decibels, A weighted<br />
• DPS Data Protection System<br />
• ECC error correcting code<br />
• G rms G root mean square<br />
•Hz hertz<br />
• KB kilobytes<br />
• Kfci thousands of flux changes per inch<br />
• LSB least significant bit<br />
• mA milliamperes<br />
• MB megabytes (1 MB = 1,000,000 bytes when referring<br />
to disk transfer rates or storage capacities and<br />
1,048,576 bytes in all other cases)<br />
• Mb/s megabits per second<br />
1-2 <strong>Quickview</strong> <strong>300</strong> 80/100/120/160/200/250/<strong>300</strong>GB <strong>PATA</strong>
Change language