2025 Design & Master Plan - South Dakota State University

More documents

Recommendations

Info

figure 2.4: bike lane on two-way streets (parallel parking both sides) figure 2.5: bike lane on two-way streets (no parking) a:6
section 3 – campus lighting Exterior lighting on campus should be consistent and provide an outdoor environment that is well-lit, safe and attractive. The light level recommendations listed below are in accordance with the Illumination Engineering Society (IES) Handbook, Ninth Edition and provide a baseline for the development of a high-quality campus lighting plan. Area Minimum Average Footcandle* Uniformity Ratio** Campus Edge 3.0-4.0 6:1 (max) Pedestrian Walkways 0.2 (min) to 1.2 (max) 6:1 Parking Lots 0.2, 0.6, 0.9* 4:1 Building Entry 5.0 Maintenance / Service 3.0 * Measurement equal to the light intensity of one candle at a distance of one foot. ** Ratio of average horizontal illumination to the minimum horizontal illumination. In parking lot lighting design, uniformity and glare control are the most important factors, as these elements have the greatest impact on nighttime visibility. Uniformity and glare should take precedence over measured light levels when evaluating outdoor lighting options. In addition to achieving the recommended light levels and uniformity, lighting design should consider the reduction of light trespass and sky glow, as well as opportunities to reduce energy consumption. Accent lighting should be considered for select areas on campus in order to emphasize nighttime points of interest. Campus gateways, signage, unique building facades, specimen trees, and public art pieces are all candidates for the incorporation of accent lighting. Fixtures illuminating these features should be controlled so as not to throw light beyond the intended focal point. figure 3.1: campus standard pedestrian light fixture Light Fixture: Manufacturer: American Electric Model: Contempo Series 245 250W Metal Halide Light; Style “A” Finish: Satin Brushed Pole: Manufacturer: Flagpoles, Inc. Aluminum Lighting Standards Model: #FPBB4310A-3B, 12 Foot Tapered Aluminum Shaft, 0.125 Inch Wall with Cast Aluminum Bell Transformer Base. Finish: Satin Brushed Base/Hardware: Manufacturer: Hubbell Power Systems Lighting Foundation: T1121248 Mounting Hardware: T112-0352 a:7 Note: Typical pedestrian light pole spacing along campus walks is approximately 75 feet.
Page 1 and 2: south dakota state university 2025
Page 3 and 4: tables table 2.1 parking classifica
Page 5 and 6: context In October 2008, South Dako
Page 7 and 8: 1.2 facilities Continuing to expand
Page 9 and 10: architectural considerations The ca
Page 11 and 12: 1.4 campus greens, entries and gate
Page 13 and 14: section 2 - today’s environment (
Page 15 and 16: use key: administration student ser
Page 17 and 18: methodology of parking calculations
Page 19 and 20: figure 2.7: photo of campus and the
Page 21 and 22: graphic key: campus open space camp
Page 23 and 24: graphic key: potential building sit
Page 25 and 26: o b b b m h b n c j k b i l g a b f
Page 27 and 28: general parking development costs C
Page 29 and 30: figure 3.6: concept view “a” of
Page 31 and 32: 3.5 pedestrian corridors freeing th
Page 33 and 34: 3.6 implementation The implementati
Page 35 and 36: phase 2: residential life southeast
Page 37 and 38: phase 4: academic core (math and en
Page 39 and 40: phase 6: athletic and academic core
Page 41 and 42: acknowledgements Two committees wer
Page 44 and 45: table of contents INTRODUCTION A:1
Page 46 and 47: section 1 - parking lots Parking lo
Page 48 and 49: figure 1.3: typical parking lot sec
Page 52 and 53: figure 3.3: campus standard parking
Page 54 and 55: section 5 - campus wayfinding signa
Page 56 and 57: section 7 - site walls When the bud
Page 58 and 59: section 9 - general landscape desig
Page 60 and 61: planting methods Use suitable topso
Page 62 and 63: turfgrass All new turf seed and sod
Page 64 and 65: ornamental trees Scientific Name Co
Page 66 and 67: seating nodes Seating nodes along p
Page 68 and 69: ermed turf areas Bermed turf areas,
Page 71 and 72: table of contents INTRODUCTION B:1
Page 73 and 74: section 1 - purpose and intent of g
Page 75 and 76: Facility construction and improveme
Page 77 and 78: 2.3 stewardship Stewardship is the
Page 79 and 80: 3.2 building size Buildings should
Page 81 and 82: 3.5 building types The campus conta
Page 83 and 84: section 4 - campus architectural im
Page 85: performing arts center university s

2025 Design & Master Plan - South Dakota State University

Create successful ePaper yourself

Delete template?

Save as template?