Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.

More documents

Recommendations

Info

Multi Gas Leak Detector MGLD.3000 Operating instructions 5. Care and service Please follow the general safety instructions in 2.2 of these operating instructions. Interventions in the device, service or repair works can only be performed by the manufacturer's customer service department or by authorized professional technicians. 5.1. Cleaning and care Remove the power plugs from the socket before cleaning. External cleaning of the MGLD.3000 and its components may only be performed using a soft, lightly moistened, non-dripping cloth. Chemical cleaning agents, abrasives, or solvents may not be used. The contacts between the docking unit and the base unit, between the device and connection line, probe and connection line, and the interfaces with the rear of the device may only be cleaned with a dry, dust-free brush. During longer periods between use, the device and hand probes must be wrapped in their original packaging materials and placed in storage. Especially with probes, the storage area must be absolutely free of any impurities and contaminants, and must be specially protected from the influence of chemical substances, e.g. silicone. 5.2. Service Before startup, regularly check the electro-pneumatic connection line for kinks, crushing or compression damage, cracks and other damage and/or impurities. Replace damaged connection lines immediately to ensure proper leak search results and to protect the device from contamination. Also regularly check the Teflon tip and the ventilation inlets/outlets on the rear of the device before startup for dirt buildup and contamination and remove these. Generally a yearly check of the hand probes by the manufacturer's customer service or by manufacturerauthorized technicians / an authorized service center is recommended. We also recommend yearly replacement of all filters by the manufacturer customer service department or by manufacturer-authorized specialists / an authorized service center. BAL_MGLD3000_20101001_en.doc 54-54
Multi Gas Leak Detector MGLD.3000 Operating instructions 5.3. Warranty Limitations In the following parts of the claim due to technological features or normal wear and tear is restricted: Battery 6 months Membrane pump 8000h membrane, 20000h motor 1) Gas sensor (Ref./H2-probe) 24 months 2) Photoacoust. chamber (CO2-probe) 12 months 3) Plugs 500 connections (Basis unit / Docking station) Connetctors (hose) 1000 connections Touch panel 24 months 4) 1) 2) 3) 4) approximate values of the manufacturer to pollution-free intake ) under normal use. Silicon-containing and sulfur-containing media and not desorbing inorganic contaminants, for example, tobacco smoke, oils, fats and liquids can be evaporated at the gas sensor lead to toxicity, which may lead to a change of Sensitivity and / or selectivity of the sensor lead. Possible consequences are a reduced sensitivity, distorted concentration or ad a background concentration. For the early detection of changes in sensor behavior for an annual review of the handheld probe by an authorized service center is recommended. The service followed the manufacturer must be adhered to-ten. in normal use. Vibrations that the highly sensitive optical system damage gene can be avoided. Contaminated intake air can cause hardware to perform optical components that affect the function of the probe. The service followed the manufacturer must be observed. If correct operation. Operate only with clean hands, soft gloves or suitable for touch panel pins. can mechanical damage (scratches) or contamination from the touch panel damage and lead to malfunction or to a restricted operation of the entire unit. The service followed the manufacturer must be observed. BAL_MGLD3000_20101001_en.doc 55-54
Page 1 and 2:
MGLD.3000 OPERATING INSTRUCTIONS 01
Page 3 and 4: Multi Gas Leak Detector MGLD.3000 O
Page 53: Multi Gas Leak Detector MGLD.3000 O
show all

Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.

Create successful ePaper yourself

Delete template?

Save as template?