Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.
Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.
Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Multi Gas Leak Detector <strong>MGLD.3000</strong><br />
Operating instructions<br />
Start Menus Warnings / functions<br />
Select leak search<br />
mode<br />
inactive<br />
Warning symbol - blinks<br />
while sensor is heated<br />
Sensor is heating<br />
inactive<br />
inactive<br />
inactive<br />
protected with password<br />
Connected to power socket<br />
Battery charge status<br />
Yellow background<br />
Warning/error present:<br />
Sensor is heating<br />
After heating up the probe (1 - 2 min. depending on special type) the<br />
<strong>MGLD.3000</strong> is ready to operate and the probe is active.<br />
Device ready to operate<br />
Probe active<br />
The <strong>MGLD.3000</strong> provides the option to protect the settings with a user password<br />
and is protected with an initial password set at the factory.<br />
Press the "lock" pictogram to access the user password query.<br />
protected with password<br />
Password<br />
Select leak search<br />
mode<br />
inactive<br />
Warnings / functions<br />
Device ready to operate<br />
Probe active<br />
inactive<br />
inactive<br />
inactive<br />
protected with password<br />
Connected to power<br />
socket<br />
Battery charge status<br />
Entry<br />
Enter the correct initial password (123) to remove the lock. 123<br />
Delete the previous character<br />
Confirm<br />
Cancel<br />
Next, the leak search mode opens that was in use before the device was last<br />
switched off.<br />
BAL_MGLD3000_20101001_en.doc 24-54