Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.

Multi Gas Leak Detector MGLD.3000
Operating instructions
4.3. Operating the MGLD.3000
4.3.1. Basic information on the graphical user navigation
Caution!
The base unit of the MGLD.3000 is controlled via touch screen. Use of the touch screen requires clean
fingers, lightweight gloves or pens that are specially designed for the touch screen. Mechanical damage
(scratches) or dirt can damage the touch screen or result in malfunctions and/or unsatisfactory performance
of the entire device.
The menu tab and main menu are located at the top of the screen. All operating modes can be selected
and all of the settings can be made from the main menu.
By pressing the pictograms in the main menu, the menu bar moves down and the relevant submenu is
displayed. The individual operating modes and settings can be accessed/entered by pressing the pictograms
of the relevant submenu.
The submenu will remain displayed while a pictogram or any other place on the touch screen is touched,
otherwise it will automatically disappear after 10 sec.
When password protection is activated, only the "leak search mode" is available. All other menu items in
the main menu are inactive.
The menu structure is shown in the summary below:
Select leak search mode
Analysis mode for quantitative gas leak detection (determines gas concentrations
or leak rate)
Dynamic search mode for qualitative leak localization
Multipoint mode with logging function
Check + calibration
active
inactive
Check and calibration function
Check and calibration results
Settings of leak search environment
Settings
active
inactive
Settings for analysis mode (threshold value)
BAL_MGLD3000_20101001_en.doc 22-54