Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.
Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc. Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.
Multi Gas Leak Detector MGLD.3000 Operating instructions (Figure 8: Plugging the connection line plug into the sensor socket ). Figure 8: Plugging the connection line plug into the sensor socket Connect the plug on the other end of the connection line of the sensor with the appropriate socket on the base unit while carefully observing the above information. Make sure that you are able to feel and hear the plug engage with the socket on the base unit. Figure 9: MGLD.3000 with connected sensor The connection of sensor and base unit may only be made via the connection line when the MGLD 3000 is switched off. BAL_MGLD3000_20101001_en.doc 20-54
Multi Gas Leak Detector MGLD.3000 Operating instructions To disconnect the connection between the relevant plug of the connection line and/or the relevant socket on the sensor or base unit, grasp the plug with your thumb and index finger on the metal ring on the exterior of the plug, carefully push it away from the socket, and then remove the plug. Figure 10: Loosening the lock and disconnecting the plug of the connection line from the socket Caution! The sensor and base unit can only be connected with (or disconnected from) the connection line when the MGLD 3000 is switched off! Force must not be use when connecting or disconnection the connection line and probe or base unit. Otherwise you may damage the plugs, connection line and/or the sockets in the probe or base unit, thus limiting device functionality and canceling warranty coverage. BAL_MGLD3000_20101001_en.doc 21-54
- Page 1 and 2: MGLD.3000 OPERATING INSTRUCTIONS 01
- Page 3 and 4: Multi Gas Leak Detector MGLD.3000 O
- Page 5 and 6: Multi Gas Leak Detector MGLD.3000 O
- Page 7 and 8: Multi Gas Leak Detector MGLD.3000 O
- Page 9 and 10: Multi Gas Leak Detector MGLD.3000 O
- Page 11 and 12: Multi Gas Leak Detector MGLD.3000 O
- Page 13 and 14: Multi Gas Leak Detector MGLD.3000 O
- Page 15 and 16: Multi Gas Leak Detector MGLD.3000 O
- Page 17 and 18: Multi Gas Leak Detector MGLD.3000 O
- Page 19: Multi Gas Leak Detector MGLD.3000 O
- Page 23 and 24: Multi Gas Leak Detector MGLD.3000 O
- Page 25 and 26: Multi Gas Leak Detector MGLD.3000 O
- Page 27 and 28: Multi Gas Leak Detector MGLD.3000 O
- Page 29 and 30: Multi Gas Leak Detector MGLD.3000 O
- Page 31 and 32: Multi Gas Leak Detector MGLD.3000 O
- Page 33 and 34: Multi Gas Leak Detector MGLD.3000 O
- Page 35 and 36: Multi Gas Leak Detector MGLD.3000 O
- Page 37 and 38: Multi Gas Leak Detector MGLD.3000 O
- Page 39 and 40: Multi Gas Leak Detector MGLD.3000 O
- Page 41 and 42: Multi Gas Leak Detector MGLD.3000 O
- Page 43 and 44: Multi Gas Leak Detector MGLD.3000 O
- Page 45 and 46: Multi Gas Leak Detector MGLD.3000 O
- Page 47 and 48: Multi Gas Leak Detector MGLD.3000 O
- Page 49 and 50: Multi Gas Leak Detector MGLD.3000 O
- Page 51 and 52: Multi Gas Leak Detector MGLD.3000 O
- Page 53 and 54: Multi Gas Leak Detector MGLD.3000 O
- Page 55: Multi Gas Leak Detector MGLD.3000 O
Multi Gas Leak Detector <strong>MGLD.3000</strong><br />
Operating instructions<br />
To disconnect the connection between the relevant plug of the connection line and/or the relevant socket<br />
on the sensor or base unit, grasp the plug with your thumb and index finger on the metal ring on the exterior<br />
of the plug, carefully push it away from the socket, and then remove the plug.<br />
Figure 10: Loosening the lock and disconnecting the plug of the connection line from the socket<br />
Caution!<br />
The sensor and base unit can only be connected with (or disconnected from) the connection line when the<br />
MGLD 3000 is switched off!<br />
Force must not be use when connecting or disconnection the connection line and probe or base unit. Otherwise<br />
you may damage the plugs, connection line and/or the sockets in the probe or base unit, thus limiting<br />
device functionality and canceling warranty coverage.<br />
BAL_MGLD3000_20101001_en.doc 21-54
Change language