Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.

Multi Gas Leak Detector MGLD.3000
Operating instructions
Place the base unit with its 4 guide bushes onto the 4 guide pins of the docking unit
(Figure 7: Placing the base unit on the docking unit
).
Figure 7: Placing the base unit on the docking unit
Connect the docking unit power connection cord with the power socket.
The batteries are already being charged in the base unit in this state (base unit switched off). The charging
period is approx. 8 hours with empty batteries.
4.2.2. Connecting the probe (stationary and mobile operation of the MGLD.3000)
Caution!
Only probes that are supplied by the manufacturer, as well as the included connection line, can be used
for operation with the MGLD.3000.
Before installation and operation, check the probe and the connection line for damage. The connection
line must be free of any kinks, crushed or compressed places, cracks, or other damage and/or contamination.
While operating the probe, make sure that the device is not exposed to crushing, stretching, compressing,
or to any deformations and impurities.
Connect the relevant probe with the provided connection socket with the plug of the supplied connection line. For
maximum accuracy of positioning and in connecting the plug on the connection line with the socket on the probe, the
plug features a nose and the socket has a matching opening. The plugs are also provided with an automatic stopping
mechanism, which provides a firm connection between the relevant plug and socket. When connecting the connection
line with the probe, make sure that you can hear and feel the plug engage with the socket of the probe.
BAL_MGLD3000_20101001_en.doc 18-54