Download - Schneider Electric

TeSys
LUTM
Controller for 3-phase motors
Function modules
+
=
Type of optional function Thermal overload alarm Motor load indication
Compatible with LUCA NO NO
Compatible with LUCL NO NO
Compatible with LUCB, LUCD YES YES
Compatible with LUCM NO YES
Output signal 1 NO 4…20 mA
Reset NA NA
References LUFW10 LUFV2
Communication modules
4
Type of communication Modbus Advantys STB CANopen DeviceNet Parallel
wiring
Only compatible with 24 V DC control units YES YES YES YES YES
LUCA..BL, LUCB..BL, LUCD..BL, LUCM..BL
Transfer speed 19.2 Kbps Dpg. on NIM (1) 20 K…1 Mbps 125…500 Kbaud NA
Number of slaves 31 per Modbus Dpg. on Network 128 per CANopen 63 per DeviceNet 8 per LU9GC02
master Interface Module module module splitter box
Pre-wired coil connection (A1 A2) LU9BN11C, LU9BN11L, LU9BN11L, LU9BN11L, LU9Rxx
LU9MRC LU9MRL LU9MRL LU9MRL
Connecting cable to PC VW3 A8 306 Rpp LU9RCDpp, TSXCANCpp DeviceNet TSXCDPppp
LU9RDDpp
standard
References LUFC033 LULC15 LULC08 LULC09 LUFC00
Information carried by the Modbus, Advantys STB or CANopen bus
Type of control unit LUCBT1BL, LUCDT1BL LUCMT1BL
Start and Stop commands X X
Starter status (ready, running, fault) X X
Thermal alarm X X
Remote reset via the bus X X
Indication of motor load X X
Signalling and fault differentiation X X
Alarms (overcurrent, …)
X
Remote programming and monitoring of all the functions
X
“Log” function
X
Monitoring function
X
Other versions: Please consult our Customer Care Centre.
29
Other versions: please consult our Customer Care Centre.
4/29