IDEC / Datasensor Sensors - Clearwater Technologies, Inc.

More documents

Recommendations

Info

Sensors Distance: MX1C Specifications General Specifications Function Specifications MX1C-AK1 Power Voltage 24V DC (ripple 10% maximum) √ √ Current Draw 200mA (maximum) √ √ Dielectric Strength Between live and dead parts: 500V AC, 1 minute √ √ Insulation Resistance Between live and dead parts: 100MΩ (minimum), with 500V DC megger √ √ Operating Temperature 0 to +45°C (performance will be adversely affected if the sensor becomes coated with ice) √ √ Storage Temperature –20°C to +70°C √ √ Operating Humidity 35% to 85% RH (avoid condensation) √ √ Vibration Resistance Damage limits: 10 to 55Hz, amplitude 1.5mm p-p, 2 hours in each of 3 axes (when de-energized) √ √ Shock Resistance Damage limits: 100m/sec 2 (approximately 10G), 5 shocks in each of 3 axes √ √ Extraneous Light Immunity Incandescent light: 3,000 lux (maximum) — defined as incident or unwanted light received by a sensor, unrelated to the presence or absence of intended object Material Housing: diecast zinc; Filter: glass; Lens: acrylic; Rear cover: polyarylate √ √ Degree of Protection IP65 — IEC Pub 529; Sensors rated IP65 are dust-tight, water-resistant, and perform best when not subjected to heavy particle or water blasts √ √ Cable Cable type: 6-core cabtyre cable 0.3mm2, 6’ 6 3/4” (2m) long √ √ Weight Approximately 400g √ √ Dimensions 1.97”D x 0.83”W x 3.07”D (50mm H x 21mm W x 78mm D) √ √ Resolution 0.002” (50 μm)—measuring conditions: sensing a white ceramic object at the reference sensing distance (60mm) using the normal response speed (50ms) at 25˚C √ √ Analog Output 20 to 4mA, 5V (maximum), fixed range √ √ Digital Output NPN or PNP transistor open collector: 30V DC, 100mA (maximum); Residual: 1V (NPN), 2V (PNP) √ √ Alarm Output NPN or PNP transistor open collector: 30V DC, 100mA (maximum); Residual: 1V (NPN), 2V (PNP) √ √ Level Meter (ten-dot LED) Analog: Represents analog output level according to the object distance Digital: Indicates preset position for near limit √ √ Out LED On: When digital output on √ √ Laser Diode LED On: While laser is emitted (LD ON), laser emits approximately 1 second after power-up √ √ Alarm LED On: When reflected light is insufficient √ √ Digital Output On: When object is within the near limit setting and beyond the close end of the sensing range (≥ 2.36” or 60mm from the sensor) √ √ Digital Output Setting Fine-tuning dial for near limit setting √ √ Response Time High-speed (F): 5ms (maximum); Normal speed (S): 50ms (maximum) √ √ Detectable Object Non-mirror-like surfaces √ √ Analog Adjustment 0.20” (5mm) = 0.8mA using multi-turn dial √ √ Linearity ±100 μm ±1% of displacement value, defined as how linear (i.e. accurate) the actual analog output is, with respect to distance √ √ Hysteresis 0.039” (1mm), defined as the difference between the operating point and the release point √ √ Temperature Drift 5 μA per °C with 1.97” (50mm) square white ceramic √ √ Light Source Element Visible laser diode (670nm), 5 mW laser √ √ Receiver Element PSD (position sensitive device) √ √ √ MX1C-AL1 √ PLCs Operator Interfaces Automation Software Power Supplies Sensors Communication & Networking Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com217
Distance: MX1C Sensors Part Numbers Function Output Sensing Range Resolution Part Numbers PLCs NPN PNP 60 to 160mm (2.36” to 6.30”) 0.002” (50μm) MX1C-AK1 MX1C-AL1 Applications Operator Interfaces Checking for warped boards Sensing loose caps Communication & Networking Power Supplies Automation Software Detecting the height and width of wood or blocks Positioning of a robot or actuator Sensors Detecting the thickness of lumber Detecting overlapping sheets/ Counting sheets of paper Sensing the roundness of a roller 218 Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 www.idec.com- Web: www.clrwtr.com - Email: info@clrwtr.com
Page 1 and 2:
Automation & Sensing Sensors W For
Page 3 and 4:
Sensors Selection Guide Optic Funct
Page 5 and 6:
Sensors Selection Guide Application
Page 7 and 8:
Tubular: S51 Series Sensors Retro-r
Page 9 and 10:
Tubular: S51 Series Sensors Operati
Page 11 and 12:
Compact: S60 Series Sensors Through
Page 13 and 14:
Compact: S60 Series Sensors Polariz
Page 15 and 16:
Compact: S60 Series Sensors Coaxial
Page 17 and 18:
Compact: S60 Series Sensors Diffuse
Page 19 and 20:
Compact: S60 Series Sensors Long Di
Page 21 and 22:
50 Compact: S60 Series Sensors PLCs
Page 23 and 24:
Compact: S62 Series Sensors Compact
Page 25 and 26:
Compact: S62 Series Sensors Emissio
Page 27 and 28:
Compact: S62 Series Sensors Detecti
Page 29 and 30:
Compact: S62 Series Sensors Laser P
Page 31 and 32:
Miniature: SA1E Sensors Miniature P
Page 33 and 34:
Miniature: SA1E Sensors Detection D
Page 35 and 36:
Miniature: SA1E Sensors Specificati
Page 37 and 38:
Fiber Optic: SA1C-FK Sensors Fiber
Page 39 and 40: Fiber Optic: SA1C-FK Sensors Part N
Page 41 and 42: Fiber Optic: SA1C-F Sensors Dimensi
Page 43 and 44: Fiber Optic: SA1C-F Sensors Part Nu
Page 45 and 46: Accessories Sensors PLCs Brackets A
Page 47 and 48: Accessories Sensors Through-Beam Fi
Page 49 and 50: Accessories Sensors Dimensions (mm)
Page 51 and 52: Accessories Sensors Brackets Dimens
Page 53 and 54: Accessories Sensors 95ACC1380 (mode
Page 55 and 56: 30º 20º 2 8 5 2 8 Accessories Sen
Page 57 and 58: Accessories Sensors PLCs Operator I
Page 59 and 60: Accessories Sensors Diffuse-Reflect
Page 61 and 62: Color: S65-V Sensors Application Se
Page 63 and 64: Color: S65-V Sensors Specifications
Page 65 and 66: Color: SA1J/SA1J-F Sensors Color: S
Page 67 and 68: Color: SA1J/SA1J-F Sensors PLCs Ope
Page 69 and 70: Color: SA1J/SA1J-F Sensors Power Su
Page 71 and 72: Contrast: TL46 Sensors Contrast: TL
Page 73 and 74: Contrast: TL46 Sensors Specificatio
Page 75 and 76: Luminescence: LD46 Sensors Luminesc
Page 77 and 78: Luminescence: LD46 Sensors Specific
Page 79 and 80: Fork/Slot: SR21 Sensors Fork/Slot:
Page 81 and 82: Fork/Slot: SR21 Sensors Power Suppl
Page 83 and 84: Distance: S80 Sensors PLCs Laser di
Page 85 and 86: Distance: S80 Sensors Detection Dia
Page 87 and 88: Distance: SA1D Sensors PLCs Operato
Page 89: Distance: MX1C Sensors Distance: MX
Page 93 and 94: Area: AS1 Sensors Area: AS1 High-re
Page 95 and 96: Area: AS1 Sensors PLCs Operator Int
Page 97 and 98: Area: DS1 Sensors Area: DS1 Detecti
Page 99 and 100: Area: DS1 Sensors PLCs Operator Int
Page 101 and 102: Magnetic: DPRI Sensors PLCs Operato
Page 103 and 104: 30º 20º Accessories Sensors 95ACC
Page 105 and 106: Laser Safety Sensors Laser Safety I
Page 107 and 108: General Information Sensors Communi
Page 109 and 110: General Information Sensors Sensors
show all

IDEC / Datasensor Sensors - Clearwater Technologies, Inc.

Create successful ePaper yourself

Delete template?

Save as template?