IDEC / Datasensor Sensors - Clearwater Technologies, Inc.

Sensors
Distance: S80
Specifications
S80-MH-5-YL09-PPIZ
S80-MH-5-YL09-NNIZ
Direct Measurement Range 1 0.3 - 7m scalable √ √
Digital Resolution 0.4mm √ √
Linearity 0.3% √ √
Temperature Drift ±0.6mm/ºC √ √
Repeatability 2
3mm @ 4m √ √
7mm @ 7m √ √
Switching Output Hysteresis 3 5mm √ √
Power Supply 15 - 30 V DC (limit values) √ √
Ripple 2Vpp max. √ √
Current Draw 110mA max. @ 24V DC √ √
Light Emission Red Laser 665nm, class 2 √ √
Setting
Indicators (On Control Panel)
Indicators (On Front)
Output Type
SET push-button √ √
+/- push-button √ √
4-digit display √ √
Yellow OUTPUT LED √ √
Green OUTPUT STATUS LED √ √
Green FAST mode LED √ √
Yellow OUTPUT LED √ √
Red ALARM LED √ √
2 PNP or 2 NPN √ √
4 - 20 mA analog √ √
Output Current ≤ 100mA √ √
Saturation Voltage ≤ 2V √ √
Response Time
Switching Frequency
5ms (NORMAL) √ √
1ms (FAST) √ √
100Hz (NORMAL) √ √
500Hz (FAST) √ √
Timing Function Selectable between 5, 10, 20, 30, 40ms √ √
Auxiliary Functions
Synchronism (SYNC) √ √
Keylock 4 √ √
RS485 serial interface √ √
Connection M12 8-pole connector √ √
Electrical Protection class 2 √ √
Mechanical Protection IP67 √ √
Protection Devices A, B 5 √ √
Housing Material aluminium √ √
Lens Material Glass √ √
Weight 330g max. √ √
Operating Temperature -10 to +50ºC √ √
Storage Temperature -25 to +70ºC √ √
Reference Standard EN60947-5-2, EN60825-1, UL508 √ √
1. On target 90% white
2. In Normal mode with 5 ms response time
3. Active with SYNC wire connected to + V DC for at least 1 s at powering
4. Connector can be locked in two positions
5. A - reverse polarity protection
B - overload and short-circuit protection
CAUTION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
EN60825-1 (1994) - IEC825-1 (1993)
Max.power < 1mW
II3D
665nm
PLCs Operator Interfaces Automation Software Power Supplies Sensors Communication & Networking
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com211