5-PHASE STEPPING SYSTEMS - sanyo denki europe
5-PHASE STEPPING SYSTEMS - sanyo denki europe
5-PHASE STEPPING SYSTEMS - sanyo denki europe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Stepping Motor<br />
General specifications<br />
Model number SH528 103H55 103H650 103H752 103H785 103H858 103H8958 103-45 103-7566<br />
Ambient<br />
operation 10 to 50<br />
temperature<br />
Storage<br />
temperature<br />
20 to 65<br />
Ambient<br />
operation 20 to 90 RHno condensation<br />
humidity<br />
Storage<br />
humidity<br />
5 to 95 RHno condensation<br />
Operation<br />
altitude<br />
1000 m3280 feetMAX. above sea level<br />
Vibration<br />
resistance<br />
Vibration frequency 10 to 500 Hz, total amplitude 1.52 mm (10 to 70 Hz), vibration acceleration 147 m/s 2 (70 to 500<br />
Hz), sweep time 15 min/cycle, 12 sweeps in each X, Y and Z direction.<br />
Impact<br />
resistance<br />
490m/s 2 of acceleration for 11 ms with half-sine wave applying three times for X, Y, and Z axes each, 18 times in<br />
total.<br />
Insulation class Class B 130<br />
Withstand<br />
voltage<br />
At normal ambient temperature and humidity, no failure with 1000 V AC @50/60 Hz applied for one minute between<br />
motor winding and frame (500 V AC for models SH528 . 103H55 , and 103-45 ).<br />
Insulation<br />
resistance<br />
At normal ambient temperature and humidity, 100 Mohm or more on megger with 500 V DC between motor<br />
winding and frame.<br />
Protection<br />
grade<br />
IP40<br />
Wiringtemperature<br />
increase<br />
80K MAX.Based on Sanyo Denki standard<br />
Standing angle<br />
error<br />
0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.04 0.09<br />
0.075mm 0.075mm 0.075mm 0.075mm 0.075mm 0.075mm 0.075mm 0.075mm 0.075mm<br />
Axial play (Note1) 0.002952inch 0.002952inch 0.002952inch 0.002952inch 0.002952inch 0.002952inch 0.002952inch 0.002952inch 0.002952inch<br />
MAX., Load MAX., Load MAX., Load 9N MAX., Load 9N MAX., Load 9N MAX., Load 9N MAX., Load 9N MAX., Load MAX., Load 9N<br />
4.4N1lbs 4.4N1lbs 2lbs<br />
2lbs<br />
2lbs<br />
2lbs<br />
2lbs 4.4N1lbs 2lbs<br />
Radial play (Note2) 0.025mm0.00098inchMAX., Load 4.4N1lbs<br />
Shaft runout<br />
Inserted part<br />
concentricity<br />
against<br />
shaft<br />
Fitted surface<br />
angularity<br />
against<br />
shaft<br />
0.025mm (0.00098inch)<br />
0.05mm<br />
(0.00196inch)<br />
0.025mm<br />
(0.00098inch)<br />
0.05mm 0.05mm 0.075mm 0.075mm 0.075mm 0.075mm 0.075mm 0.05mm 0.075mm<br />
( 0.00197inch) ( 0.00197inch) ( 0.00295inch) ( 0.00295inch) ( 0.00295inch) ( 0.00295inch) ( 0.00295inch) ( 0.00197inch) ( 0.00295inch)<br />
0.1mm<br />
(0.00394inch)<br />
0.1mm<br />
(0.00394inch)<br />
0.075mm<br />
(0.00295inch)<br />
0.075mm<br />
(0.00295inch)<br />
0.075mm<br />
(0.00295inch)<br />
(Note1) Axial play: Shaft displacement under axial load.<br />
(Note2) Radial play: Shaft displacement under radial load applied 1/3rd of the length from the end of the shaft.<br />
0.075mm<br />
(0.00295inch)<br />
0.075mm<br />
(0.00295inch)<br />
0.075mm<br />
(0.00295inch)<br />
0.075mm<br />
(0.00295inch)<br />
94