5-PHASE STEPPING SYSTEMS - sanyo denki europe

Model number convention
Example: The model number of the set with an AC driver and motor model 103F7851-70CXA4 is composed as follows.
This motor is specified as 60mm sq. (2.36inch sq.) and 92mm (3,62inch) long (motor + gear), single shaft, with
low backlash gears.
AC input Set model
Micro step
FS
F 78 1 S - CX 3.6
Gear ratio
3.6 to 100
CXLow-backlash gear model
HXHarmonic gear model
XBElectromagnetic brake model
DC input Set model
Micro step
DC input Set model
Full / half step
Stepping motor shaft spec.
SSingle shaftDDouble shaft
Stepping motor total length (Applies to standard and CE/UL models. See the
Dimensions pages for models equipped with gears and electromagnetic brakes.)
Stepping Motor
Code
Motor size
42mm sq. (1.65inch sq.) 60mm sq. (2.36inch sq.)
86mm ( 3.39inch)
106mm ( 4.17inch)
Motor model
number
Motor length :
mm(inch)
Motor model
number
Motor length :
mm(inch)
Motor model
number
Motor length :
mm(inch)
Motor model
number
Motor length :
mm(inch)
1 1035505 34 (1.34) 1037851 46.5 (1.83) 1038581 62.15 (2.45)
2 1035508 40 (1.57) 1037852 55 (2.17) 1038582 92.2 (3.63) 10389582 163.3 (6.43)
3 1037853 87.5 (3.44) 1038583 125.85 (4.95) 10389583 221.3 (8.71)
4 1035510 49 (1.93)
Replace the box character depicted in the motor model number with 'M' for CE/UL models, and 'F' for
others.
Linear Actuator
Stepping Motor
Stepping motor size
5542mm sq. (1.65inch sq.)85 86mm ( 3.39inch)
7860mm sq. (2.36inch sq.)89 106mm ( 4.17inch)
Stepping Motor Types
FStandard, with gear, and with electromagnetic brake
MCE/UL compliant
Stepping motor for
vacuum environment
FSAC input
Dimensions
9