5-PHASE STEPPING SYSTEMS - sanyo denki europe
5-PHASE STEPPING SYSTEMS - sanyo denki europe
5-PHASE STEPPING SYSTEMS - sanyo denki europe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
60mm ( 2.36inch)<br />
AC input Set model<br />
Micro step<br />
Characteristics<br />
0.45/step<br />
Motor with leads<br />
Holding torque at<br />
Model number<br />
Rated current Wiring Winding<br />
Rotor inertia MassWeight<br />
5-phase energization<br />
resistance inductance<br />
Single shaft Double shaft [Nm ozinMIN.] A/phase /phase mH/phase [ 10 -4 kgm 2 (ozin 2 )] kg (lbs)<br />
103-7566-7041 103-7566-7011 0.91 (128.9) 0.75 4.8 23 0.235 (1.28) 1.1 (2.43)<br />
103-7566-7041<br />
103-7566-7011<br />
Torque ozin.<br />
250<br />
200<br />
150<br />
100<br />
50<br />
0<br />
Torque Nm<br />
2.0<br />
1.6<br />
1.2<br />
0.8<br />
0.4<br />
Pull-out torque at JL1<br />
0<br />
0.1 1 fs 10<br />
100<br />
Pulse rate kpulse/s<br />
10 100<br />
1000 2000 3000 5000<br />
Number of rotations min 1 <br />
Constant current circuit<br />
Source voltageAC100Voperating current0.75A/phase<br />
5-phase excitationfull step<br />
JL1= [2.6 10 -4 kgm 2 14.22 ozin 2 use the rubber coupling]<br />
fs: Maximum self - start frequency when not loaded<br />
Dimensions<br />
DC input Set model<br />
Micro step<br />
DC input Set model<br />
Full / half step<br />
Stepping Motor<br />
Linear Actuator<br />
Stepping Motor<br />
Stepping motor for<br />
vacuum environment<br />
Allowable load/Internal wire connection/Direction of motor rotate P.93General specifications P.94Motor dimensions P.99The data are measured under the drive condition<br />
of our company. The drive torque may very depending on the accuracy of customer -side equipment.<br />
85