5-PHASE STEPPING SYSTEMS - sanyo denki europe
5-PHASE STEPPING SYSTEMS - sanyo denki europe
5-PHASE STEPPING SYSTEMS - sanyo denki europe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Input circuit configuration of PD<br />
• If the peak value exceedes 5V, set the input current to approx. 15mA using<br />
5 220<br />
the external limit resistance R.<br />
+5V<br />
1000pF<br />
Input signal 6<br />
R<br />
Driver<br />
Output signal configuration of MON, AL<br />
AC input Set model<br />
Micro step<br />
DC input Set model<br />
Micro step<br />
79<br />
Output signal<br />
810<br />
MAX. 10mA<br />
MAX. 40V<br />
Driver<br />
DC input Set model<br />
Full / half step<br />
MON output<br />
CW<br />
CCW<br />
NON output<br />
• Photo coupler at phase origin of motor excitation (status at power on) is set<br />
toON<br />
• Output from MON is set to on at every 7.2 degrees of motor output shaft<br />
from phase origin.<br />
Stepping Motor<br />
Ex.) Setting when number of division is 1 (full step)<br />
Dimensions<br />
Stepping motor for<br />
vacuum environment<br />
Linear Actuator<br />
Stepping Motor<br />
83