5-PHASE STEPPING SYSTEMS - sanyo denki europe

Model number convention
Example: The model number of the set with a DC driver and motor model 103F7851-82CXA4 is composed as follows.
This motor is specified as 60mm sq. (2.36inch sq.) and 92mm (3,62inch) long (motor + gear), single shaft, with
low back-lash gears.
AC input Set model
Micro step
FD
F 78 1 S
-
CX
3.6
Gear ratio
3.6 to 100
DC input Set model
Micro step
CXLow-backlash gear model
GXSpur gear model
HXHarmonic gear model
XBElectromagnetic brake model
DC input Set model
Full / half step
Stepping motor shaft spec
SSingle shaftDDouble shaft
Stepping motor total length (This is the standard model case. See the dimensions
page for models with gears and electromagnetic brake.)
Stepping Motor
Code
Motor size
28mm sq. (1.10inch sq.) 42mm sq. (1.65inch sq.) 60mm sq. (2.36inch sq.)
86mm ( 3.39inch)
Motor model Motor length : Motor model Motor length : Motor model Motor length : Motor model Motor length :
number mm (inch) number mm (inch) number mm (inch) number mm (inch)
1 SH5281 32 (1.26) 103F5505 34 (1.34) 103F7851 46.5 (1.83) 103F8581 62.2 (2.45)
2 103F5508 40 (1.57) 103F7852 55 (2.17) 103F8582 92.2(3.63)
3 103F7853 87.5 (3.44)
4 103F5510 49 (1.93)
5 SH5285 51.5 (2.03)
Linear Actuator
Stepping Motor
Stepping motor size
5228mm sq. (1.10inch sq.)7860mm sq. (2.36inch sq.)
5542mm sq. (1.65inch sq.)85 86mm ( 3.39inch)
Stepping motor series name
FFSH series motor
Stepping motor for
vacuum environment
FDDCinput DC24/36V Full/half step
Dimensions
61