5-PHASE STEPPING SYSTEMS - sanyo denki europe

DC input Set modelMicro step
DC input Set model
Micro step
Set Model Configuration P.36
SpecificationsCharacteristics P.38 to 52
Motor specifications P.53Driver specifications P.54
Motor dimensions P.97 to 104Driver dimensions P.105
Features
The auto-micro function provides low vibration and smooth drive
even with coarse resolution setting of one or two divisions (full-/
half-step), and supports micro steps of 250 divisions.
High precision current detection reduces speed fluctuations by
50% compared with former model.
Model No.: F5PAE140P100. Our conventional product Model No.: PMDPC1S3P01
Set model configuration items
Driver
Model numberF5PAE140P100Power supplyDC24V/48V
Motor
Motor size 28mm sq. (1.10inch sq.), 42mm sq. (1.65inch sq.),
60mm sq. (2.36inch sq.), 86mm. ( 3.39inch)
Cables with connectors
Power supply, Input/output signal, Motor (1m each)
Instruction manuals can be downloaded from our website.
System configuration
Motor
End cap side
Electromagnetic brake
Encoder (option)
Host Devices
PLC, etc.
I/O signal cable (Set model configuration items)
Flange side
Spur gear
Low-backlash gear
Harmonic gear
Brake power source
DC24V
Required for brakeequipped
stepping
motor models.
Motor cable
(Set model
configuration items)
Driver
Pulse signal
Regeneration resistor
Model number FFE-01
(Optional
Accessories)
Connect the regenerative resistor
when there is a risk that the supply
voltage could exceed 60 V DC due
to the motor's back emf.
Power supply cable
(Set model configuration items)
AC power
source
Single phase
100V to 230V
Molded case
circuit breaker
Electromagnetic
contactor
Noise filter
Switching
power supply
DC power source
24V/48V
Protects the power line.
Cuts off circuit in the
event of overcurrent.
Switches driver power
on/off. Use together
with a surge protector.
Filters out incoming
noise from power line.
Converts AC power to
DC power.
34