Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Safety Precautions <strong>common</strong><br />
Caution<br />
<br />
General <br />
1. Before starting installation, operation, maintenance, or inspection, be<br />
sure to read the Operator’s Manual carefully and observe the instructions<br />
in it.<br />
Failure to observe the instructions may result in electric shock, injury, or<br />
fire.<br />
2. Do not use the system out of the specifications of the amplifier.<br />
Doing so may result in electric shock, injury, or damage.<br />
3. Do not use a damaged amplifier.<br />
Doing so may result in injury or fire.<br />
4. Use an amplifier and a motor in the specified combination.<br />
Doing so may result in a fire or failure.<br />
5. Note that the amplifier/motor and peripheral units will become hot enough<br />
to cause a burn.<br />
Unpacking <br />
6. Open the box only after checking its top and bottom to avoid injury.<br />
7. Check if the product is the ordered one.<br />
Installing an incorrect wrong product may result in injury or damage.<br />
8. To avoid damage, do not measure the insulation resistance or the<br />
pressure resistance. Please contact us if testing is necessary.<br />
9. Wiring should follow electric equipment technical standards and indoor<br />
wiring regulations. An electrical short or fire could otherwise result.<br />
10. Wiring connections must be secure to avoid motor interruption or injury.<br />
11. Avoid applying static electricity to the encoder terminals on the motor.<br />
Doing so may result in functional failures.<br />
Installation <br />
12. Do not stand on the device or place heavy objects on top of it. Doing so<br />
may result in injury.<br />
13. Do not obstruct the air intake and exhaust vents, and keep them free of<br />
debris and foreign matter. Fire could otherwise result.<br />
14. Make sure the mounting orientation is correct. Damage could otherwise<br />
result.<br />
15. Consult the User Manual regarding the required distance between the<br />
amplifier, the control panel interior, and other devices. Damage to the<br />
device could otherwise result.<br />
16. Never apply a strong shock to the system. Doing so may result in damage.<br />
17. Secure the device against dropping or turning over during installation.<br />
18. Never expose the device to water, corrosive or flammable gases, or any<br />
flammable materials. Doing so may result in fire or failure.<br />
19. Install the device on a metal or other non-flammable structure. Otherwise,<br />
fire accident may occur.<br />
14
Change language