common - Sanyo Denki America, Inc.

Safety Precautions common
Prohibited
Storage
1. Do not store the device where it could be exposed to rain, water, toxic gases or other
liquids. Damage to the device could otherwise result.
Operation
2. The built-in brake is intended to secure the motor; do not use it for regular control.
Damage to the brake could otherwise result.
Maintenance
3. Do not disassembly or repair the system. Doing so may result in fire or electric shock.
General
4. Do not remove the nameplate cover attached to the device.
Storage
Mandatory
1. Store the system in a place which is not exposed to direct sunlight and in
the determined temperature/humidity range (−20°C to +65°C, 90% RH or
less without condensation).
2. When the system is to be stored for a long time (more than 3 years as a
reference period), consult us.
The capacity of the electrolytic capacitors decreases during long-term
storage, and could cause damage to the device.
Operation
3. Install an external emergency stop circuit that can stop the device and cut
off the power instantaneously. Install an external protective circuit to the
amplifier to cut off the power from the main circuit in the case of an alarm.
Motor interruption, injury, burnout, fire and secondary damage could
otherwise result.
4. Operate within the specified temperature and humidity range {Amplifier:
Temperature 0 to 55, Humidity below 90% RH (non-condensing); Motor:
Temperature 0 to 40Humidity below 90% RHnon-condensing)
Transportation
5. Follow the directions written on the outside box. Excess stacking could
result in collapse.
16