*Sortiment- u. Bestell._03

TECEflex ®
The flexible pipe system for
sanitary installations, heating
and flor heating systems
TC-QUICKPIPE ®
The installation system for
sanitary installations, heating
and industry
TECEprofil ®
The curtain wall system for
refurbishment and new
buildings
TECEspültechnik ®
TECEregister ®
Installation register
Your partner
for intelligent
home services
TECE GmbH & Co. KG
Hollefeldstraße 57
D-48282 Emsdetten
Our hotline:
Sales Division North/East
Hotline: 0 25 72/ 92 8-201
Sales Division West
Hotline: 0 25 72/ 92 8-202
Sales Division South
Hotline: 0 25 72/ 92 8-200
info@tece.de
Visit us: www.tece.de
DS030 000 62 a

4.1 04/03
TECEprofil ®
Assortment and order list 04/03
TECEprofil ®
The curtain wall system for refurbishment and new buildings
The new modules!
Now usable universally:
• for installation in the curtain wall
• for installation as individual module
• for installation in a metal or
wood post wall
NEW! The TECEbox
for wet building
TECEambia pushplates
TECEantibac antibacterial pushplates
Assortment Sortiments- and und order Bestellliste list 04/03 04/03
Your partner
for intelligent
home services

TECEprofil ®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
Basic components
Fig. description Order- No. UNIT 1 UNIT 2 UNIT 3 Qty
pc. pc. pc.
TECEprofil ® -Section Pipe
to provide a supporting framework for mounting
of TECEprofil ® components
Made of rolled steel, welded, galvanized
33 mm x 33 mm in bars of 4,5 m each.
9.000.000 18 630 1890
m m m
TECEprofil ® -Corner joint
9.010.002 30 240 1440
for force-fit angular connection
of the TECEprofil ® Section Pipes.
Pre-assembled unit made of galvanized steel,
including mounting hardware,
M5 (SW3)socket screw and pressure spring.
TECEprofil ® -Angle bracket
9.030.002 10 80 --
for attachment of the TECEprofil ® Section Pipes
to the building.
Pre-assembled unit made of galvanized steel,
including mounting hardware.
TECEprofil ® -Double joint
9.030.011 5 -- --
Assortment and order list 04/03
for simultaneous fixture of two TECEprofil ®
Section Tubes to the building. For supporting framework depths
of 140-220 mm.
Pre-assembled unit made of galvanized steel,
including mounting hardware.
1

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
WC-Modules
Fig. description Order- No. UNIT 1 UNIT 2 UNIT 3 Qty
pc. pc. pc.
New!
TECEprofil ® Universal Module for WC with TECE flushing cistern;
front operation
for fixture of TECEprofil ® Section pipes or for the installation in metal or
wood post walls and as curtain wall or corner module:
also suitable for single block mounting.
Completely pre-assembled unit consisting of:
TECE concealed flushing cistern for front operation:
• safety cistern made of impact-resistant, blown PE-HD
• flushing cistern completely pre-assembled and sealed.
• corner valve and flushing cistern connection pre-mounted. Flushing cistern
connection with 1/2" female thread
• 10 litres cistern volume; 6 litres preset standard flushing volume; 9 litres
flushing volume optionally adjustable at any time; 3 litres partial volume
flush with dual flush technology. Remaining volume usable for cleaning
flush.
• condensation water insulated
• usable as single- or dual flush cistern depending on the pushplate.
• tested according to DIN 19542 - test certificate MWUE 0120284
• fittings group 1 acc. to DIN 4109 - test certificate P-IX3837/I;
• low-noise hydraulic filling valve - Lap

TECEprofil ®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
WC-Modules
Fig. description Order- No. UNIT 1 UNIT 2 UNIT 3 Qty
pc. pc. pc.
New!
TECEprofil ® Universal Module 820 mm, for WC with TECE flushing cistern;
Operation from the top or front
for attachment to TECEprofil ® section pipe or as curtain wall or corner module.
Completely pre-assembled unit consisting of:
TECE concealed flushing tank for top or front operation:
• Safety cistern made of impact-resistant, blown PE-HD
• flushing cistern completely pre-assembled and sealed.
• corner valve and flushing cistern connection pre-mounted. Flushing cistern
connection with 1/2" female thread
• Hydraulically optimized flushing cistern with low overall heights.
• 10 litres cistern volume; 6 litres flushing cistern according to DIN 19542; 9
litres flushing volume adjustable; 3 litres partial volume flush
for dual flush technology. Remaining volume usable for cleaning
flush.
• Usable as single- or dual flush cistern depending on the pushplate.
• Usable for operation from the top or front, depending on the installation.
• tested according to DIN 19542 - test certificate BMW 0220216
• fittings group 1 acc. to DIN 4109 - test certificate P-IX3837/I;
• Low-noise hydraulic filling valve - Lap

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
WC-Modules and connection units
Fig. description Order- No. UNIT 1 UNIT 2 UNIT 3 Qty
pc. pc. pc.
TECEprofil ® Universal Module for WC with DAL GD2 flushing cistern;
front operation
9.300.002 1 18 54
same as 9.300.000 but with Grohe DAL GD2 flushing cistern for single-flush
technology.
9.300,002 replaces the item numbers:
9.100.002, 9.100.000, 9.500,000 and 9.500.005
TECEprofil ® Universal Module for WC with Geberit flushing cistern;
front operation
9.300.011 1 18 54
same as 9.300.000 but with Geberit 6 litres flushing cistern.
For Tango, Rumba, Twist Samba, Mambo operation systems
9.300.011 replaces the item number: 9.100.011
New!
TECEprofil ® WC connection unit with TECE flushing cistern;
front operation
9.041.006 1 18 54
For attachment to TECEprofil ® Section Pipes, consisting of:
TECE concealed flushing tank for front operation:
• safety cistern made of impact-resistant, blown PE-HD
• flushing cistern completely pre-assembled and sealed.
• corner valve and flushing cistern connection pre-mounted. Flushing cistern
connection with 1/2" female thread
• 10 litres cistern volume; 6 litres preset standard flushing volume; 9 litres
flushing volume optionally adjustable at any time; 3 litres partial volume
flush with dual flush technology. Remaining volume usable for cleaning
flush.
• condensation water insulated
• usable as single- or dual flush cistern depending on the
pushplate.
• tested according to DIN 19542 - test certificate MWUE 0120284
• fittings group 1 acc. to DIN 4109 - test certificate P-IX3837/I;
• Low-noise hydraulic filling valve - Lap

TECEprofil ®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
WC connection packages and wet construction flushing cistern
Fig. description Order- No. UNIT 1 UNIT 2 UNIT 3 Qty
pc. pc. pc.
TECEprofil ® - Support frame for wall-mounted WC
9.041.000 1 32 --
for use in TECEprofil ® support structures in front of solid walls,
pre-assembled unit consisting of: steel frame, welded,
galvanized, with depth- and height-adjustable fixtures
• 2 M12 retainer bolts and nuts, bolt clearance 18 cm or 23 cm
• PE drain elbow DN 80/100
• protection and marking plug
• WC connection package
• mounting hardware for flushing cistern (makes: DAL 330.00.200/336.00.200
and Geberit Kompakt 110.830.00.1)
• without flushing cistern, flushing tube
• without pushplate 37,5 x 27,5 x 18 - 25 cm
TECEprofil ® -connection package for wet construction flushing cistern
9.020.016 1 -- --
For installation of wet construction flushing cisterns in a TECEprofil ® curtain
wall. To match Geberit “Kombifix Montageelement für Wand-WC”,
Sanit “Montageelement 980”, and Jomo “Jomofix” elements.
Connection package consisting of powder-coated support feet and spacer.
Depth adjustment of the wall possible via the wet construction flushing
cistern only.
Note: Installation in a free-standing wall is not possible.
The wet construction flushing cistern is not included in the TECE delivery
scope.
TECEbox ® wet construction flushing cistern; front operation for
installation in a brick curtain wall in front of a solid wall.
9.370.000 1 18 54
Assortment and order list 04/03
Consisting of:
• safety cistern made of impact-resistant, blown PE-HD
• flushing cistern completely pre-assembled and sealed.
• corner valve and flushing cistern connection pre-mounted. Flushing cistern
connection with 1/2" female thread
• 10 litres cistern volume; 6 litres preset standard flushing volume; 9 litres
flushing volume adjustable optionally at any time; 3 litres partial volume
with dual flush technology. Remaining volume usable for cleaning flush.
• condensation water insulated
• usable as single- or dual flush cistern depending on the pushplate.
• tested according to DIN 19542 - test certificate MWUE 0120284
• fittings group 1 acc. to DIN 4109 - test certificate P-IX3837/I;
• Low-noise hydraulic filling valve - Lap

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
Washstand modules
Fig. description Order- No. UNIT 1 UNIT 2 UNIT 3 Qty
pc. pc. pc.
TECEprofil ® Universal module for washstand
9.310.000 1 18 54
for fixture of TECEprofil ® Section pipes or for the installation in metal or
wood frame walls and as curtain wall or corner module:
Completely pre-assembled unit consisting of:
• self-supporting mounting frame with powder-coated surface
• two adjustable feet for a floor construction from 0 to 200 mm
• two M 10 retainer bolts,
• height- and side-adjustable clearance 30 - 400 mm
• plug as a protection during construction
• sound-insulated fitting crosshead for fixture of wall disks
80, 120, 150, 200 mm gauge for bore holes
• DN 40/50 connecting elbow with NW 30/50 rubber collar (gasket at the
same time)
• 1120 mm x 500 mm x 140 mm
Please order separately:
• Wall disks TECEprofil ® 16x1/2” 9.021.015 or 1/2”x1/2” 9.021.017
• fixture for the individual curtain wall, corner or wooden frame mounting
9.310.000 replaces the item numbers:
9.110.000, 9.510.006 and 9.510.000
TECEprofil ® Universal Module for washstand with concealed trap;
9.310.004 1 18 --
for fixture of TECEprofil ® Section pipes or for the installation in metal or
wood frame walls and as curtain wall or corner module:
For construction of washstand equipment that can be moved under as per
DIN 18024 - 2(Obstruction-Free Building - Ch. 2: Publicly accessed buildings
and work places).
Completely pre-assembled unit consisting of:
• self-supporting mounting frame with powder-coated surface
• two adjustable feet for a floor construction from 0 to 200 mm
• two M 10 retainer bolts,
• height- and side-adjustable clearance 30 - 400 mm
• plug as a protection during construction
• sound-insulated fitting crosshead for fixture of wall disks 80, 120, 150, 200
mm gauge for bore holes
• with concealed DN 50 trap, removable siphon insert NW 30 (gasket at the
same time)
• 1120 mm x 500 mm x 140 mm
Please order separately:
• Wall disks 9.021.015 TECEprofil ® 16 x 1/2” or 9.021.017 1/2” x 1/2”
• fixture for the individual curtain wall, corner or wooden frame mounting
• connecting pipe for siphon/WT – to be provided by customer (e.g. Dallmer 1
– 14000 5)
9.310.004 replaces the item numbers: 9.110.004 and 9.510.005
Assortment and order list 04/03
6

TECEprofil ®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
Washstand Modules and connection packages
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® Universal module for sink basin, surface-mounted tubs or
surface-mounted shower fittings
9.310.002 1 18
for fixture of TECE profil® Section pipes or for the installation in metal or
wood frame walls and as curtain wall or corner module:
Completely pre-assembled unit consisting of:
• self-supporting mounting frame with powder-coated surface
• two adjustable feet for a floor construction from 0 to 200 mm
• hydraulic glue attachment plate made of veneer board as per DIN 68705
• height- and side-adjustable clearance 30 - 400 mm
• plug as a protection during construction
• sound-insulated fitting crosshead for fixture of wall disks 80, 120, 150, 200
mm gauge for bore holes
• DN 40/50 connecting elbow with NW 30/50 rubber collar (gasket at the
same time)
• 1120 mm x 500 mm x 140 m
Please order separately:
• wall disks 9.021.015 TECE flex® 16 x 1/2” or 9.021.017 1/2” x 1/2”
• fixture for the individual curtain wall, corner or wooden frame mounting
9.310.004 replaces the item number: 9.510.002
TECEprofil ® -connection package for washstand
9.020.033 1 --
Sound-insulated crosshead made of galvanized steel, for external
fixture of wall disks, with pre-mounted DN 50/40 drain elbow, NW
30/50 rubber collar, marking plug, mounting hardware for mounting
to TECEprofil ® section pipes, 2 x anchoring clips M10 and washstand
fixtures.
Gauge for bore holes: 80,120,150,200 mm
Please order wall disks separately
9.021.015 TECEprofil ® 16 x 1/2"
or 9.021.017 1/2" x 1/2""
TECEprofil ® -connection package for washstand
incl. TECEprofil ® 16 x 1/2" wall disks
9.020.018 1 --
Assortment and order list 04/03
Sound-insulated crosshead made of galvanized steel,
pre-mounted wall disks with preset 80 mm gauge for
bore holes, pre-mounted drain elbow DN 50/40, NW
30/50 rubber collar, marking plugs, mounting hardware
for attachment to TECEprofil ® Section Pipes, 2x
M10 anchoring clips and washstand fixtures.
Gauge for bore holes: 80,120,150, 200 mm
7

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
Connection packages
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® -Connection Package
for washstand concealed trap
9.020.034 1 --
Sound-insulated crosshead made of galvanized steel, for external
fixture of wall disks, with pre-mounted concealed DN 50 trap, removable
siphon insert NW 30 (gasket at the same time)including
marking plug, mounting hardware for attachment to TECEprofil ®
section pipes, 2x M10 anchoring clips and washstand fixtures.
Gauge for bore holes: 150, 200 mm
Please order wall disks separately
9.021.015 TECEprofil ® 16 x 1/2"
or 9.021.017 1/2" x 1/2"
Please order connecting pipe for siphone WT separately - externally
(e.g. Dallmer 1 -14,000 5)
TECEprofil ® -Connection wash-stand support
for the installation in metal or wooden frame walls.
9.510.003 1 --
Pre-assembled unit consisting of:
• mounting frame with powder-coated surface
• two M 10 retainer bolts, height- and side-adjustable
clearance 30 - 400 mm
• fittings connection crosshead
• DN 40/50 connecting high-temperature elbow with NW 30/50 rubber
collar
Please order wall disks separately (TECEflex ® 16x1/2“ 9.021.015
or 1/2”x1/2” 9.021.017)
Assortment and order list 04/03
8

TECEprofil ®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
Urinal modules
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® Universal module for urinal with Schell structural set
9.320.002 1 18
to mount manual and electronic operation systems.
For fixture to TECEprofil ® Section pipes or for the installation in metal or
wood frame walls and as curtain wall or corner module:
Completely pre-assembled unit consisting of:
• self-supporting mounting frame with powder-coated surface
• two adjustable feet for a floor construction from 0 to 200 mm
• two M 8 retainer bolts,
• steplessly adjustable mounting rail
• steplessly height-adjustable drain water connection
• DN 50 high-temperature drain elbow including plug for protection
• hardware mounting material for urinal
• 1120 mm x 500 mm x 140 mm
Structural set to match the manual operation:
- Schell Compact VERONA (Schell Item No.: 01 122 XX 99)
Structural set to match the electronic operations:
- Schell Compact INFRA 230V (Schell Item No.: 01 121 XX 99)
- Schell Compact INFRA battery (Schell Item No.: 01 122 XX 99)
- Kludi SENSORA 230 V (Kludi Item no.: 36 550 XX)
- Kludi SENSORA Battery (Kludi Item no.: 36,500 XX)
Please order separately:
• operation system (see above)
• supply set (see ceramics manufacturers or e.g. Schell 03 105 00 99)
• fixture for the individual curtain wall, corner or wooden frame mounting
9.320.002 replaces the item numbers: 9.120.007 and 9.520.003
TECEprofil ® Universal Module for urinal with DAL concealed flushing
valve
9.320.000 1 18
As above, however, with GroheDAL concealed flush valve
• Please order pushplate separately (e.g. DAL Surf 116 x 144 mm)
Assortment and order list 04/03
9.320.000 replaces the item numbers: 9.120.006 and 9.520.000
9

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
Urinal modules and connection package
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® Universal module for urinal with DAL structural set
9.320.001 1 18
As above, however with GroheDAL structural set for infrared electronics
• Please order electronics separately (DAL “Tectron Surf”
or DAL “Tectron Skate”)
9.320.001 replaces the item numbers: 9.120.003 and 9.520.001
TECEprofil ® -connection package for urinal
with Schell structural set
9.020.017 1 --
To mount manual and electronic operation systems.
Sound-insulated crosshead made of galvanized steel with
pre-assembled structural set, 1/2" x 1/2" fittings connection
3 x M8 anchoring clips and urinal fixture.
Structural set to match the manual operation:
• Schell Compact VERONA (Schell Item No.: 01 122 XX 99)
Structural set to match the electronic operations:
• Schell Compact INFRA 230V (Schell Item No.: 01 121 XX 99)
• Schell Compact INFRA battery (Schell Item No.: 01 122 XX 99)
• Kludi SENSORA 230 V (Kludi Item no.: 36 550 XX)
• Kludi SENSORA Battery (Kludi Item no.: 36.500 XX)
Please order separately:
Supply set (see ceramics manufacturers or e.g. Schell 03 105 00 99)
Bidet
TECEprofil ® Universal module for wall-mounted bidet
For fixture of TECEprofil ® Section pipes or for the installation in metal or
wood frame walls and as curtain wall or corner module:
Completely pre-assembled unit consisting of:
• self-supporting mounting frame with powder-coated surface
• two adjustable feet for a floor construction from 0 to 200 mm
• two M 12 retaining bolts and nut
• two adjustable fittings connections, 1/2" x 1/2" female
• steplessly height-adjustable drain water connection
• high-temperature DN 50/50 connecting elbow with NW 30/50 rubber collar
(gasket at the same time), including plug for protection
• 1120 mm x 500 mm x 140 mm
9.330.000 1 18
Please order separately:
• fixture for the individual curtain wall, corner or wooden frame mounting
9.330.000 replaces the item numbers: 9.130.000 and 9.530.000
Assortment and order list 04/03
10

TECEprofil ®
DAS MODULARE SANITÄRWANDSYSTEM
FÜR RENOVIERUNG UND NEUBAU
Fittings connections
Bild Bezeichnung Best.- Nr. LE 1 LE 2 Menge
St. St.
TECEprofil ® -Fittings connection crosshead
9.020.035 1 --
For the connection of surface-mounted fittings to a TECEprofil ®
support frame, sound-insulated crosshead made of galvanized
steel, for on-site mounting
of wall disks, including mounting hardware for attachment to
TECEprofil ® Section Pipes,
Gauge for bore holes: 80,120,150, 200 mm
Please order wall disks separately
9.021.015 TECEflex ® 16 x 1/2"
or 9.021.017 1/2" x 1/2"
TECEprofil ® -Mounting plate for concealed fittings
9.150.000 1 --
steplessly depth-adjustable mounting plate for fixture of concealed fittings
and other installations, adjustment range 50-80 mm, pre-assembled unit,
consisting of:
• support plate made of hydraulic glue
veneer board as per DIN 68705
• Mounting angle, galvanized
• four multi-clamps
500 x 190 x 73 mm
TECEprofil ® -Connection Package for stop valve and water meter
Holder for sturdy fixture of commercially available stop valves and
water metres by means of pipe clips; infinitely variable clearance,
depth and height adjustment, pre-assembled unit, consisting of:
• two pipe clips with sound-insulation rubber
(25-28 mm)
• Mounting material for mounting to a
TECEprofil ® Section Pipe
9.020.019 1 --
TECEprofil ® -connection package for washing machine
9.020.036 1 --
Sortiments u. Bestellliste 04/03
For horizontal or vertical installation into a TECEprofil ® support frame,
consisting of:
• crosshead made of galvanized steel for attachment of siphon
and wall disk
• Wall-installation siphon for washing machine, DN 40/50
• Chrome-plated hose connection, dia 20mm, 30mm and 3/4“
• Chrome-plated rosette, dia. 86 mm
• mounting hardware for attachment to TECEprofil ® brace,
Please order wall disks separately:
TECEflex ® 16 x 1/2" (Order no. 9.021.015)
or TECEflex ® 1/2“ x 1/2” (Order no. 9.021.017)
11

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
Fittings connections
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® -Fittings connection,
TECEflex ® 16 x 1/2"
9.020.020 4 --
For connection of a single tap to the TECEprofil ®
support framework, pre-assembled unit consisting of:
• wall disk TECEprofil ® 16 x 1/2",
long design
• sound-insulated from support framework
• self-adhesive leathering for sealing
between panel and wall disk
• mounting material for mounting to a
TECEprofil ® Section Pipe
• marking plug
TECEprofil ® -Fittings connection,
1/2" x 1/2"
9.020.004 4 --
For connection of a single tap to the TECEprofil ® support framework,
pre-assembled unit consisting of:
• wall disk 1/2" x 1/2", long design
• sound-insulated from support framework
• self-adhesive leathering for sealing between panel and wall disk
• Mounting material for mounting to a TECEprofil ® Section Pipe
• marking plug
Support grips
TECEprofil ® Module for support handle and support systems
for installation into a UA profile plank wall or as curtain wall element.
Completely pre-assembled unit consisting of:
• self-supporting mounting frame with powder-coated surface
• two adjustable feet for a floor construction from 0 to 200 mm
• hydraulic glue veneer board as per DIN 68705
• mounting hardware for attachment to a UA-Profil wall
• 1120 mm x 300 mm x 80 mm
9.360.000 1 --
Please order separately:
For curtain wall mounting: depth-adjustable module fixture 9.380.000
9.360.000 replaces the item number: 9.560.000
Assortment and order list 04/03
12

TECEprofil ®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
Support handles
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® -Mounting plate for support grips and holding systems
9.042.003 1 --
For rigid mounting of support handles and holding systems in a TECEprofil ®
support framework.
pre-assembled unit consisting of:
• mounting plate for bolting to a TECEprofil ® Universal module
• made of hydraulic glue veneer board as per DIN 68705
• two multi-clamps for attachment to the TECEprofil ® supporting framework
9.042.003 replaces the item number: 9.042.000
Tub structure
TECEprofil ® -plug-in foot for tub support
and cladding system
Plug-in foot for tub support and cladding system
9.140.000 1 --
Adjustment foot and end cap to plug into a TECEprofil ® pipe
To build supporting tub claddings. The adjustment foot is suitable to
support loads, e.g., to support steel tubs.
No additional steel tub feet required.
Consisting of:
• adjustment foot for height adjustment of TECEprofil ® braces,
adjustment range 30 mm
• end cap with rubber coat
TECEprofil ® -Acrylic tub foot
9.140.001 1 --
System tub foot for TECEprofil ® tub structure with acrylic tubs. To
support the laminated-in base plate of square, oval or asymmetric
tubs.
Height-adjustable across a range from 125 to 195 mm.
Consisting of:
• two hat profile rails
• four height- and side-adjustable feet
• locking nuts
• Mounting material for mounting to acrylic tubs
Assortment and order list 04/03
13

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
Tub Building
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® -Tub anchor
9.140.002 1 --
Tub anchor for TECE profil® wall structures using acrylic and
steel tubs. To lock and support the tub edge. The tub anchors are
fixed with the enclosed mounting hardware to the building wall.
Consisting of:
• three tub anchors with plastic cap
• mounting hardware
TECEprofil ® -tub insulation ribbon with tear off edge
9.140.003 1 --
Tub insulation ribbon for TECE profil® tub structures using acrylic
and
steel tubs. For sound insulation between tub edge and tiles. The
ribbon has a high ageing stability.
Two different glue layers and a tear-off edge provide for clean
mounting.
Consisting of:
• 3,3 m insulation ribbon
• strong glue layer for lateral tub edge
• reduced glue layer for upper wall edge
Module fixtures
TECEprofil ® Depth-adjustable curtain wall fixture
for TECEprofil ® Universal module
9.380.000 1 --
Consisting of:
• two depth-adjustable module fixtures
• mounting hardware
9.380.000 replaces the item number: 9.580.007
TECEprofil ® Telescopic fixture for TECEprofil ®
9.380.001 1 --
to extend the module side braces and for attachment to a vertical
TECEprofil ® brace.
Consisting of:
• two height-adjustable module fixtures
• mounting hardware for attachment to a TECEprofil ® brace
Assortment and order list 04/03
14

I
I
TECEprofil ®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
Module fixtures
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® Height-adjustable module fixture for curtain wall mounting
9.380.002 1 --
for attachment of the TECEprofil ® Universal modules in front of a massive or
wall board. Provides for a variable depth and height adjustment
of the deposit surface.
Completely pre-assembled unit consisting of:
• Mounting crosshead with galvanized surface
• two wall fixtures,
• depth-adjustable from 130 to 200 mm,
• height-adjustable, to adapt to the tile grid
• mounting hardware for mounting before the wall
9.380.002 replaces the item number: 9.580.000
TECEprofil ® Module attachment for corner mounting
9.380.003 1 --
49,5 45 cm
for corner attachment of the TECEprofil ® Universal modules in front of a
building corner.
For all modules, space-saving corner mounting including the
accommodation of downpipes, ventilation and supply lines behind the
module is possible.
Minimum dimensions: Depth 350 mm, leg length 495 mm, front 700 mm
Consisting of:
• two wall fixtures for corner mounting using a variable angle
• mounting hardware vor mounting before the wall
9.380.003 replaces the item number: 9.580.006
TECEprofil ® Module fixture for wall corner mounting
9.380.004 1 --
Assortment and order list 04/03
for attachment of the TECEprofil ® Universal modules in an angle of 45° to
a massive wall or wall board. Just one leg has to be bolted to
the wall.
Depth 350 mm, leg length 495 mm, front 700 mm
Completely pre-assembled unit consisting of:
• Mounting crosshead with galvanized surface,
• height-adjustable, to adapt to the tile grid
• galvanized light-weight section for attachment of the planking
• mounting hardware for mounting before the wall
9.380.004 replaces the item number: 9.580.015
15

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
Module fixtures
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® Fixture set for plank walls
9.380.005 1 --
Mounting hardware for attachment of the TECEprofil ® Universal modules to
the lateral wooden posts.
• 4 hexagon wood screws
• 4 washers
9.380.005 replaces the item number: 9.580.005
TECEprofil ® Fixture set for UA-Profile Walls
9.380.006 1 --
Mounting hardware for attachment of the TECEprofil ® Universal modules to
the side UA profiles. Suitable for UA 50 sections according to DIN 18182
Part 1.
• 4 bolts with nuts
• 8 washers
Accessories
TECEprofil ® -System wall disk,
TECEflex ® 16 x 1/2"
9.021.015 2 --
long dry construction wall disk for on-site mounting with WT, bidet
and surface-mounted fittings in the TECEprofil ® -System,
consisting of:
• wall disk TECEflex ® 16 x 1/2", long design
• self-adhesive leathering for sealing between panel and wall disk
• mounting hardware
• marking plug
Assortment and order list 04/03
16

TECEprofil ®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
Accessories
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® -System wall disk,
1/2" x 1/2"
9.021.017 2 --
long dry construction wall disk for on-site mounting with WT, bidet
and surface-mounted fittings in the TECEprofil ® -System,
consisting of:
• wall disk neutral 1/2" x 1/2", long design
• self-adhesive leathering for sealing between panel and wall disk
• mounting hardware
• marking plug
TECEprofil ® -Double fixture, long
9.030.013 2 --
Double fixture, long
for simultaneous fixture of two TECEprofil ® Section pipes to
the building.
For shaft wand supporting frame depths from 220 to 300
mm.
Pre-assembled unit made of galvanized steel including
mounting hardware.
TECEprofil ® -Universal joint
9.018.002 6 --
to join the TECEprofil ® section pipes in any given angular position.
Pre-assembled unit made of galvanized steel.
TECEprofil ® -Multi-clip
9.010.003 10 --
to attach external materials to TECEprofil ® section Pipes.
Pre-assembled unit,
consisting of:
Assortment and order list 04/03
• M8 bolt and nut
• sheet made of galvanized steel
17

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
Accessoires
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® -Connection strap
9.020.003 1 --
for universal attachment of wall installations,pre-assembled unit,
consisting of:
• steel strap, galvanized, punched
• Mounting hardware for mounting to a TECEprofil ® section Pipes
TECEprofil ® -Anchoring clip
9.040.004 10 --
Anchoring clip M8
to attach an M8 threaded rod.
Pre-assembled unit made of galvanized steel, without threaded rod.
TECEprofil ® -M10 Anchoring clip
9.040.001 10 --
Anchoring clip M10
to attach an M10 threaded rod.
Pre-assembled unit made of galvanized steel, without threaded rod.
TECEprofil ® -erection bolts 4,2 x 13
9.018.007 100 500
self-drilling recessed head screw for attachment of
external materials to TECEprofil ® Section Pipes and
crossheads.
TECEprofil ® -support foot for free-standing walls
9.030.017 2 --
to reinforce free-standing TECEprofil ® support
frames.
Pre-assembled, consisting of:
• support foot made of galvanized steel
• Mounting hardware for mounting
to the structural floor slab
• Mounting hardware for mounting to the
TECEprofil ® support frame.
Assortment and order list 04/03
18

TECEprofil ®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
Accessoires
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEprofil ® -Section-Section Joint
9.010.009 5 --
for rigid joining of two
TECEprofil ® section pipes in axial direction.
Planking
TECEprofil ® -Panel
Moisture-proof board for planking
of the TECEprofil ® supporting framework and the TECEprofil ® modules.
Made of impregnated plasterboard, DIN 4102-A2 non-flammable.
1350 mm x 625 mm x 18 mm.
9.200.000 30 90
TECEprofil ® -Filler
for filling of joints in the
planking made of TECEprofil ® panels.
Delivered in bags of 5 kgs each
9.200.001 5 20
kg kg
TECEprofil ® -panel screw tapping
9.200.002 250 5000
for attachment of the TECEprofil ® panels
to TECEprofil ® section Pipes.
made of steel, 3.5 mm x 35 mm
Pushplates
TECEambia pushplate for dual-flush technology, white
9.240.200 1 --
Pushplates for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplates rubber-buffered on both sides.
Incl. operation rods and mounting hardware.
214 x 152 mm
Assortment and order list 04/03
19

UNIT 1 = Minimum order quantity per item, partially, supply below the minimum order quantity
is not possible for technical reasons
UNIT 2 = Euro pallet
Pushplates
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEantibac Pushplate for dual-flush technology,
white, antibacterial
9.240.240 1 --
Anti-bacterial pushplate for TECE flushing cistern for front or top operation.
Plastic operation system with pushplates rubber-buffered on both sides.
Incl. operation rods and mounting hardware.
214 x 152 mm
TECEambia Pushplate for dual-flush technology,
chrome mat
9.240.225 1 --
Pushplate for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplates rubber-buffered on both sides.
Incl. operation rods and mounting hardware.
214 x 152 mm
TECEambia Pushplate for dual-flush technology,
chrome glossy
Dual flush plate, chrom glossy
9.240.226 1 --
Pushplate for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplates rubber-buffered on both sides.
Incl. operation rods and mounting hardware.
214 x 152 mm
TECEambia Pushplate for dual-flush technology,
Frame chrome matt, pushplate chrom glossy
9.240.253 1 --
Pushplates for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplates rubber-buffered on both sides.
Incl. operation rods and mounting hardware.
214 x 152 mm
Assortment and order list 04/03
20

TECEprofil
®
THE MODULAR SANITARY WALL SYSTEM
FOR REFURBISHMENT AND NEW BUILDING
Pushplates
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEambia Pushplate for dual-flush technology,
Frame chrome glossy, pushplate chrom mat
9.240.254 1 --
Pushplate for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplates rubber-buffered on both sides.
Incl. operation rods and mounting hardware.
214 x 152 mm
TECEambia Pushplate for dual-flush technology,
pergamon
9.240.201 1 --
Pushplate for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplates rubber-buffered on both sides.
Incl. operation rods and mounting hardware.
214 x 152 mm
TECEambia Pushplate for single-flush technology,
white
9.240.100 1 --
Pushplate for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplate rubber-buffered on both sides.
Incl. operation rod and mounting hardware.
214 x 152 mm
TECEantibac Pushplate for single-flush technology,
white, antibacterial
9.240.140 1 --
Anti-bacterial pushplate for TECE flushing cistern for front or top operation.
Plastic operation system with pushplates rubber-buffered on both sides.
Incl. operation rod and mounting hardware.
214 x 152 mm
TECEambia TECE ambia Pushplate for single-flush technology,
chrome mat
9.240.125 1 --
Assortment and order list 04/03
Pushplate for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplate rubber-buffered on both sides.
Incl. operation rod and mounting hardware.
21

Pushplates
Fig. description Order No. Unit 1 Unit 2 Qty
pc. pc.
TECEambia Pushplate for single-flush technology,
chrome glossy
Single flushing plate, chrom gloss
9.240.126 1 --
Pushplates for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplate rubber-buffered on both sides.
Incl. operation rod and mounting hardware.
214 x 152 mm
TECEambia Pushplate for single-flush technology,
pergamon
Single flushing plate, pergamon
9.240.101 1 --
Lieferbar ab
01.05. 2003
Pushplates for TECE flushing cisterns for front or top operation.
Plastic operation system with pushplate rubber-buffered on both sides.
Incl. operation rod and mounting hardware.
214 x 152 mm
Notes:
• All existing assortment prices are superseded by this assortment list.
• Supplied to specialised wholesaler only.
• Our General Conditions of Sale and Delivery apply which are available by mail on
request.
• Delivery starting from EUR 1,500.00 net value delivered free
• Minimum order quantity EUR 300.00 net. If this value is not achieved, a flat fee of
EUR 30.00 is charged.
• Additional freight charges for express freight at the purchaser´s expense.
• Subject to technical changes.
• The documents were prepared according to the current state of knowledge, in
addition, principally “state of the art” applies.
Valid from the date of issue 01.04.2003 until the date of the new issue.
Subject to changes and errors.
Assortment and order list 04/03
22

TECEprofil
®
DAS MODULARE SANITÄRWANDSYSTEM
FÜR RENOVIERUNG UND NEUBAU
Preisliste 04/02