documentation - Sagemcom

CX 1000-3 240V 60Hz
Single-phase electronic
meter for household
applications

• Direct connection single phase meter
• Measurement of the active and reactive energy
• Single or multi tariff
• Programmable load profile
• Control of maximum demand on active power
or intensity
• Configurable LCD Display
• Historical records
• AMR ready (BUS 62 056 – 31)
RS 485 Serial port
• Reading without power capability
• Enhanced anti-temper system
• Load management via built-in relay (2A)
• Extended temperature range
• External power supply
A combined expertise in metering, telecommunications
and system integration
Sagemcom developed solid leadership positions in
broadband communication & convergence, energy
management and telecom systems integration, all 3 key
factors to address new challenges in the energy sector.
Thanks to this unique expertise, Sagemcom has created a
comprehensive offer focused on energy efficiency and its
ecosystem.
Moreover, by choosing Sagemcom you benefit from :
A world class manufacturer who controls its own production
capacity
A flexible industrial site dedicated to mass production
A technology validated and approved worldwide
A top of the range technical support
The highest standards of quality
Technical features
CURRENT
• Current Range :
- DIN : 5(60)A
• Auto-consumption :
- Voltage < 1W and 10VA
- Current < 1VA at Ib
• Power supply = 240 V
• Frequency = 60 Hz
METERING DATA
• Measurement of imported and exported active
energy and reactive energy in 4 quadrants* (Q1,
Q2, Q3, Q4)
• Class 1 or 2 accuracy according to IEC
62052-11 & 62053-21 for active energy
• Class 2 or 3 accuracy according to IEC
62052-11 & 62053-23 for reactive energy
• Meter Constant = 1 pulse / Wh
(programmable)
• Instantaneous measurement of U, I, P
• Average measurement of P, Q, S and power
factor
• Reading without power (Magnetic Reed
contact) capability*
TARIFF MANAGEMENT
• Single tariff or multi-tariff management by
Built-in real time clock with 7 day super-cap
back-up or lithium battery (15 years) or tariff
input*
• Up to 6 registers for imported active energy*
• Up to 6 Maximum Demand Registers*
• 1 register for exported active energy*
• 1 register per quadrant for reactive energy*
• Programmable load profile*
• 12 Billing periods (historical records)*
RECORDING
• Non-volatile memory E2PROM
• Micro power failure ride-through
• Daily record of meter data
DISPLAY
• Programmable LCD / 8 digits or OBIS / 6 digits
OUTPUTS / COMMUNICATION
• Pulse output according to DIN 43864 and
IEC 62053-31*
• 2 Amps relay output*
• Local reading & programming by push-button*
• Local reading & programming through IEC
61107 optical interface (IEC62056-31 protocol)
• Remote reading & programming through
twisted pair bus (IEC 62056-31)*
ANTI-FRAUD SYSTEM
• Record of :
- Power supply time
- Energy consumption time
- Date & hour of programming and cover openings
• Non-consumption indicator
• Phase reversal indicator
• Option for optical interface programming
only with cover opened
MECHANICAL FEATURES
• IP53 protection degree (IEC 60529)
• Dimensions (mm) : H 172, L 137, P 42
• Fixing Triangle DIN 43857
• Weight : 380 g
• Operating Temperature :
-40°C to +70°C
-20 to + 70°C (for clock model)
• Humidity ≤ 90% at 40°C – Option for tropicalization
CONNECTION
• BS type
• DIN type
PROGRAMMING SOFTWARE
• Programming and reading software compatible
with Microsoft Windows (98 and later)
* According to the model
All rights reserved. The information and specifications included are subject to change without prior notice. Sagemcom Energy & Telecom tries to ensure that all information in this document is correct, but does not accept liability
for error or omission. Non contractual document. All trademarks are registered by their respective owners. Simplified joint stock company - Capital 44.824.840 Euros - 518 250 337 RCS Nanterre. 10/2011
Sagemcom Energy & Telecom SAS
Headquarters : 250, route de l’Empereur
92848 Rueil-Malmaison Cedex - FRANCE
Tel : +33 (0)1 57 61 10 00 - Fax : +33 (0)1 57 61 10 01
www.sagemcom.com