Instructions for use I - Hofmann Megaplan
Instructions for use I - Hofmann Megaplan
Instructions for use I - Hofmann Megaplan
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.6 - CONTROL PANEL AND DISPLAY<br />
Fig. 7<br />
5<br />
10 19 7<br />
FINE<br />
9 18<br />
15<br />
ALU<br />
S D<br />
inch<br />
mm<br />
MENU<br />
STOP<br />
11 17 8<br />
3 1/2<br />
4<br />
USER 2<br />
ALU M<br />
mm<br />
START HOME<br />
ENTER<br />
STOP<br />
13 16 12 14<br />
6<br />
1-2 Digital readouts, AMOUNT OF UNBALANCE, inside/outside<br />
3-4 Digital readouts, POSITION OF UNBALANCE, inside/outside<br />
5 Indicators, correction mode selected<br />
6 Indicators, selection made<br />
7 Push button, unbalance reading < 5 g (.25 oz)<br />
8 Push button, operator selection<br />
9 Push button, selection of mode of correction<br />
10 SPLIT push button (unbalance resolution)<br />
11 Push button, FUNCTIONS MENU<br />
12 Push button, selection conÞ rmation<br />
13 Push button, cycle start<br />
14 Push button, emergency<br />
15 Push buttons, manual DISTANCE/DIAMETER/WIDTH setting<br />
16 Push button, home<br />
17 Push button, position repetitor<br />
18 Push button, diameter and width measuring selection<br />
19 Push button, unbalance optimization<br />
N.B.:<br />
Only <strong>use</strong> the Þngers to press the push buttons. Never <strong>use</strong> the counterweight pincers or other<br />
pointed objects.<br />
- When the beep signal is enabled (see section ACUSTIC SIGNAL), pressing of any push button is<br />
accompanied by a “beep”.<br />
I 0162 GB - 7
Change language