Instructions for use I - Hofmann Megaplan
Instructions for use I - Hofmann Megaplan
Instructions for use I - Hofmann Megaplan
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.1 - BRAKE PEDAL<br />
4 - CONTROLS AND COMPONENTS<br />
This pedal allows the operator to hold the wheel<br />
when Þ tting the counterweights. It must not be<br />
actuated during the measuring cycle.<br />
4.2 - PNEUMATIC LOCKING PEDAL (Version P)<br />
This pedal allows releasing the device fastening<br />
the wheel on the adapter. Do not actuate<br />
this pedal during the machine cycle and/or<br />
when adapters other than the standard cone<br />
adapter are mounted.<br />
The pedal has two stable positions: top, wheel<br />
unclamped; bottom, wheel clamped<br />
4.3 - AUTOMATIC DISTANCE AND DIAMETER GAUGE<br />
This gauge allows measuring distance of the rim from the machine and the diameter at the point of<br />
application of the counterweight. This gauge also allows correct positioning of the counterweights inside<br />
the rim by using the speciÞ c function (see INDICATION OF EXACT CORRECTION POSITION IN ALU-M) whereby<br />
the position can be read on the display; this function is <strong>use</strong>d <strong>for</strong> the measurement (<strong>for</strong> calibration, see<br />
ALU-M WHEEL).<br />
4.4 - MANUAL RIM DISTANCE GAUGE (OPTION)<br />
This gauge serves <strong>for</strong> manual measurement of the distance of the point of application of the counterweight<br />
from the machine. (see “AUTOMATIC WIDTH” OPTION )<br />
4.5 - AUTOMATIC WHEEL POSITIONING<br />
At the end of the spin, the wheel is positioned according to unbalance on the outside or static unbalance<br />
(when selected).<br />
Positioning is disabled automatically <strong>for</strong> wheels smaller than 13” in diameter.<br />
Accuracy is approx. ± 20 degrees <strong>for</strong> wheels weighing up to 25 kg.<br />
I 0162 GB - 6
Change language