Instructions for use I - Hofmann Megaplan
Instructions for use I - Hofmann Megaplan
Instructions for use I - Hofmann Megaplan
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6.3.3 - WIDTH GAUGE (OPTION)<br />
- Shift the width gauge tip into measuring position shown in Þ g. 16A and<br />
keeping it still, press .<br />
- Shift the gauge tip into measuring position shown in Þ g. 16B and<br />
keeping it still, press .<br />
CORRECT CALIBRATION<br />
- Return the gauge to rest position<br />
- The wheel balancer is ready <strong>for</strong> operation<br />
Fig. 16A<br />
Fig. 16B<br />
*mm 300<br />
N.B. :<br />
- It is advised to carry out the width gauge calibration with the help of another person in order to<br />
correctly position the gauge tip in the two required positions and press<br />
simultaneously.<br />
- In the event of errors or faulty operation, the writing : appears on the<br />
display: shift the width gauge to rest position and repeat the calibration operation exactly as<br />
described above. If the error persists, contact the Technical Service Department.<br />
- In the event of incorrect input in the width gauge calibration function, press to cancel it.<br />
I 0162 GB - 21