Instructions for use I - Hofmann Megaplan
Instructions for use I - Hofmann Megaplan Instructions for use I - Hofmann Megaplan
6 - SET-UP 6.1 - SELF-DIAGNOSTICS DISPLAY TEST All displays, readouts and LED’s should light up in sequence - Turn the wheel in direction of rotation. The following appears: - Turn the wheel in reverse direction of rotation The following appears: - In one complete rev. of the wheel (in direction of rotation) this should appear once: - Test parameter - Displays values of DISTANCE sensor - Displays values of DIAMETER sensor - Displays values of WIDTH sensor (optional) END OF SELF-DIAGNOSTICS CANCELS SELF-DIAGNOSTICS IN ANY PHASE HOME or I 0162 GB - 18
6.2 - SELF-CALIBRATION For machine self-calibration proceed as follows: - Mount any wheel on the shaft, even if not balanced; better still if of an “average” size. - Preset the exact dimensions of the wheel mounted.( use a sized metal wheel 6" x 14" ± 1") CAUTION!! Presetting of incorrect dimensions would mean that the machine is not correctly calibra ted, therefore all subsequent measurements will be incorrect until a new self-calibration is performed with the correct dimensions! - Perform a spin under normal conditions. - Add 100 g (3.5 oz) on the outside in any position. - Shift the 100 g. weight from the outside to the inside keeping the same position. - Rotate the wheel until to shift the 100 g. weight to the 12 o’clock position. END OF SELF-CALIBRATION HOME or CANCELS SELF-CALIBRATION IN ANY PHASE I 0162 GB - 19
- Page 1 and 2: Instructions for use I INDEX Page 1
- Page 3 and 4: 1 - GENERAL 1.1 - GENERAL SAFETY RE
- Page 5 and 6: 3.3 - PNEUMATIC CONNECTION (P versi
- Page 7 and 8: 4.6 - CONTROL PANEL AND DISPLAY Fig
- Page 9 and 10: 5 - INDICATIONS AND USE OF THE WHEE
- Page 11 and 12: 5.2.1.2 - ALU-M WHEEL (correction f
- Page 13 and 14: 5.4 - RESULT OF MEASUREMENT Fig. 13
- Page 15 and 16: 5.4.2 - SPLIT FUNCTION (unbalance s
- Page 17: 5.4.4 - ALU AND STATIC MODES From t
- Page 21 and 22: 6.3.3 - WIDTH GAUGE (OPTION) - Shif
- Page 23 and 24: 9 - LIST OF RECOMMENDED SPARE PARTS
6 - SET-UP<br />
6.1 - SELF-DIAGNOSTICS<br />
DISPLAY TEST<br />
All displays, readouts and LED’s should light up in sequence<br />
- Turn the wheel in direction of rotation.<br />
The following appears:<br />
- Turn the wheel in reverse direction of rotation<br />
The following appears:<br />
- In one complete rev. of the wheel (in direction of rotation)<br />
this should appear once:<br />
- Test parameter<br />
- Displays values of DISTANCE sensor<br />
- Displays values of DIAMETER sensor<br />
- Displays values of WIDTH sensor (optional)<br />
END OF SELF-DIAGNOSTICS<br />
CANCELS SELF-DIAGNOSTICS IN ANY PHASE<br />
HOME<br />
or<br />
I 0162 GB - 18