Instructions for use I - Hofmann Megaplan
Instructions for use I - Hofmann Megaplan
Instructions for use I - Hofmann Megaplan
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.4.2 - SPLIT FUNCTION (unbalance spread)<br />
The SPLIT function is <strong>use</strong>d to position the adhesive weights behind the wheel spokes so that they are<br />
no longer visible. It is advisable to utilise this function only in the event of static unbalance or with<br />
ALU-M functions. Input the wheel dimensions and start the spin. To start the SPLIT function, input the<br />
following data:<br />
Display example prior<br />
to SPLIT function<br />
Input the number of spokes (3-12)<br />
- Place any spoke in the vertical position<br />
15<br />
30<br />
- Place the Þ rst Split unbalance in correction position 1.<br />
30<br />
15<br />
- Correction position 1<br />
30<br />
15<br />
- Place the second Split unbalance in correction<br />
position 2<br />
30<br />
15<br />
- Correction position 2<br />
To return to normal unbalance display, press the button<br />
To per<strong>for</strong>m a new spin, subsequently press the button<br />
I 0162 GB - 15