Instructions for use I - Hofmann Megaplan

More documents

Recommendations

Info

The left display shows the values for the correct inside positioning, the right display for the outside positioning. Fig. 15 - Bring the wheel into correct angular position; - Move the gauge until the LED corresponding to the chosen correction plane lights up; - Rotate the pliers upwards until the correct weight lies against the rim; I 0162 GB - 14
5.4.2 - SPLIT FUNCTION (unbalance spread) The SPLIT function is used to position the adhesive weights behind the wheel spokes so that they are no longer visible. It is advisable to utilise this function only in the event of static unbalance or with ALU-M functions. Input the wheel dimensions and start the spin. To start the SPLIT function, input the following data: Display example prior to SPLIT function Input the number of spokes (3-12) - Place any spoke in the vertical position 15 30 - Place the Þ rst Split unbalance in correction position 1. 30 15 - Correction position 1 30 15 - Place the second Split unbalance in correction position 2 30 15 - Correction position 2 To return to normal unbalance display, press the button To perform a new spin, subsequently press the button I 0162 GB - 15
Page 1 and 2: Instructions for use I INDEX Page 1
Page 3 and 4: 1 - GENERAL 1.1 - GENERAL SAFETY RE
Page 5 and 6: 3.3 - PNEUMATIC CONNECTION (P versi
Page 7 and 8: 4.6 - CONTROL PANEL AND DISPLAY Fig
Page 9 and 10: 5 - INDICATIONS AND USE OF THE WHEE
Page 11 and 12: 5.2.1.2 - ALU-M WHEEL (correction f
Page 13: 5.4 - RESULT OF MEASUREMENT Fig. 13
Page 17 and 18: 5.4.4 - ALU AND STATIC MODES From t
Page 19 and 20: 6.2 - SELF-CALIBRATION For machine
Page 21 and 22: 6.3.3 - WIDTH GAUGE (OPTION) - Shif
Page 23 and 24: 9 - LIST OF RECOMMENDED SPARE PARTS

Instructions for use I - Hofmann Megaplan

Create successful ePaper yourself

Delete template?

Save as template?