Instructions for use I - Hofmann Megaplan

5.4 - RESULT OF MEASUREMENT
Fig. 13
Inside correction
Outside correction
After performing a balancing spin, the amounts of unbalance are shown on the digital readouts.
Digital readouts with LED’s 3- 4 lit up indicate the correct angular wheel position to mount the counterweights
(12 o’clock position). In the event of acoustic indicator enabled (see par. HANDLING OF THE FUNCTIONS
MENU) a “beep” indicate the correct correction position.
If the unbalance is less than the threshold selected, is displayed instead of the unbalance. With it
is possible to read the values below the threshold chosen gram by gram.
5.4.1 - INDICATION OF EXACT CORRECTION POSITION IN ALU-M
In correction mode ALU-M it is possible to cancel approximations in the mounting of the counterweights
by proceeding as follows:
Fig. 14
- Press push button
- Insert the correction weight in the special seat on the weight holding pliers;
- Remove the gauge taking into account that the following appears on the display:
to remove the gauge towards the outside
to move the gauge in rest position
I 0162 GB - 13