Windows Server 2003 Recommended Baseline Security

More documents

Recommendations

Info

Unclassified ITSG for Windows Server 2003 EnableLMHosts=Yes The EnableLMHosts value determines if the server will use the Hosts file to resolve network name to address translations. The setting ‘Yes’ indicates the Hosts file will be used for name resolution. AdapterSections=params.MS_TCPIP.Adapter1 The AdapterSections value defines the location in this file that contains the definition of the adapter. 3.3.1.14 [params.MS_TCPIP.Adapter1] SpecificTo=Adapter1 The SpecificTo value identifies the network adapter to which the block of commands applies. The setting ‘Adapter01’ applies to the first network adapter identified. DHCP=No The DHCP value identifies if the system uses DHCP. The setting ‘No’ indicates that the system will not obtain a TCP/IP address from a DHCP server. IPAddress=xxx.xxx.xxx.xxx The IPAddress value defines the IP address for the adapter. SubnetMask=xxx.xxx.xxx.xxx The Subnetmask value provides the subnet mask addresses. DefaultGateway=xxx.xxx.xxx.xxx The DefaultGateway value defines the address for Packets bound outside the mask. The gateway acts as the first stop in the route to the target system. WINS=No The WINS value determines if the system will use Windows Internet Name Service. The setting ‘No’ disables WINS on the specified adapter. 30 March 2004 Automated Installation
Windows Server 2003 Recommended Baseline Security (ITSG-20) NetBIOSOptions=0 The NetBIOSOptions value determines if the system enables NetBIOS over TCP/IP. The setting ‘zero’ disallows NetBIOS over TCP/IP. 3.3.1.15 [NetOptionalComponents] DHCPServer=0 The DHCPServer value determines if the system will install the DHCP Server. The setting ‘0’ does not install the DHCP Server. DNS=0 The DNS value determines if the system will install the DNS Server. The setting ‘0’ does not install the DNS Server software. IAS=0 The IAS value determines if the system will install the Internet Authentication Service. The setting ‘0’ does not install the Internet Authentication Service. ILS=0 The ILS value determines if setup will install services that support telephony features (caller ID, conference calls, video conferencing, faxing, etc.). The setting ‘0’ does not install the Internet Locator Service. LDPSVC=0 The LPDSVC value determines if setup will install UNIX Print services. The setting ‘0’ does not install UNIX Print services. MacPrint=0 The MacPrint value determines if setup will install Macintosh print services. The setting ‘0’ does not install Macintosh Print services. MacSrv=0 The MacSrv value determines if setup will install Macintosh file services. The setting ‘0’ does not install Macintosh file services. Automated Installation March 2004 31
Page 1 and 2: IT Security Guidance Windows Server
Page 3 and 4: Windows Server 2003 Recommended Bas
Page 15: Windows Server 2003 Recommended Bas
Page 28 and 29: Unclassified ITSG for Windows Serve
Page 100 and 101:
Unclassified ITSG for Windows Serve
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
show all

Windows Server 2003 Recommended Baseline Security

Create successful ePaper yourself

Delete template?

Save as template?