AGFA d-lab.3 Digital Compact Lab

General Data and Informations
Repair
Floor space for operation /
service
General
− Right side 600 mm
− Left side 1.100 mm
− Front
900 mm
− Minimum distance to the wall:
for operation 150 mm
for service 600 mm
Digital Minilab to print negative films, slides and images from digital
sources and save digital data on digital storage media.
− TFS Prescanner and high-power Main Scanner
− Single sheet Printer with a digital exposure system (Laser)
− Scanner and Printer integrated in one chassis
− Paper Processor with Agfa-specific laser paper chemistry
Interfaces
− Ethernet for the data exchange and the connection of the external
workstation or a lab network
− External densitometer
− Modem
− Label printer for pricing
Main control
− Integrated Pentium-PC for the main control of the d-lab.3
− NT operating system
− Integrated disk drive, CD-ROM, Zip
− Touch screen monitor as user interface
Noise level
58 dB(A) Standby
65 dB(A) Print mode
68 dB(A) Print mode with Sorter
Optional accessories − Additional table for a larger working area
− External label printer for pricing
− Masks for the different negative sizes and slides
− Options for other print processing functions
Print sizes Minimum: 82 mm x 117 mm (3,25" x 4,75") 4,75" paper
Maximum: 210 mm x 305 mm (8,25" x 12") 8,25" paper
Production capacity 1.700 prints/hour (eff., including Indexprint) under the following
conditions:
− Film size 135-24, 24 normally exposed negatives
− Print size 102x152 mm
− 152 mm paper width
Service cycle − Frequency: 6 months (probably)
− Time input: 0,5 days (probably)
10.2 2000-01-02 /PN 9009 AGFA d-lab.3