AGFA d-lab.3 Digital Compact Lab

Maintenance
Repair
Scanner
Oil the Scanner Carriage
Oil the shaft on both sides of the 2 sinter bearings
(1) with Constant OY 220, moving the
scanner carriage to and fro
dlabr161
Negative Carrier: Lubricate the toothed Belts / Shafts (if required)
Remove the negative carrier (4 screws)
Unscrew the film supply
Lubricate the toothed belt inside with Isoflex
Topas NB 52
Lubricate the shafts with Isoflex Topas NB 52
Caution!
Do not touch the red lacquered screw - bottom
centre. Remove only the safety washers, push the
little rollers to the front as shown in the magnified
illustrations and grease the shafts.
sp02
Negative Carrier: Clean the Roller Sets
Clean the 2 roller sets TR4 and TR5 and
replace them if necessary
− Replace the roller with ball bearings:
CM+7.8506.5015.1 x 2
CM+7.0371.0072.1 x 2
dlabr066
9.4 2001-01-02 /PN 9009 AGFA d-lab.3