AGFA d-lab.3 Digital Compact Lab

Maintenance
Repair
yearly
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
every
2 years
Technician required
Automatic water replenishment / Evaporation measuring recipient
Clean the water tank and remove lime deposits, if necessary
Clean evaporation measuring recipient
Dryer rack
Check the foam plastic rollers, replace if necessary
Clean the removable rollers and the goffered plate
Clean the large plastic roller
Check the bearing blocks and replace them if necessary
Check the chain tension, retention if necessary
Lubricate the continuous drive chain
Lubricate the (outer) gears
Transport belt
Check the transport belt, retention if necessary
Print chute
If required lubricate the gears and
the bearing points of the rocker
Inlet roller in front of the IR dryer
Clean the inlet roller
Lubricate the gears
IR dryer
Clean the rollers
Clean and lubricate the continuous chain
Clean and lubricate the plastic gears
Outlet Unit
Clean the Outlet Unit
Check the rollers, if necessary, lubricate the plastic bearings and the bearing
points of the mobile guide elements
Replace the plastic gears if they are worn, otherwise lubricate them
Densi area in the Outlet Unit
Clean the densitometer area and the densitometer head
Check the pressure mechanism
Paper magazine area left and right
Check the coupling, replace if necessary
Check the closing lever
Laser
x x Replace the laser
x
End of the maintenance jobs
x
Check the machine functions
x
Check the perfect condition of the safety devices
9.2 2001-01-02 /PN 9009 AGFA d-lab.3