AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Functional Check after the Replacement of Parts
If parts are replaced on an assembly group which
also influence the paper transport, a functional test
with paper should be performed in the Service
program.
For this, the assembly group has to be pulled out
and operated via the service cables.
There are other Scripts available, besides the
indicated ones:
Scripts/scripts_printer/data_ld/allgemein/4x6slow.txt
Scripts/scripts_printer/data_ld/allgemein/dplfast.txt
Scripts/scripts_printer/data_ld/allgemein/ldls_prf.txt
Scripts/scripts_printer/data_ld/allgemein/LD_vers.txt
Scripts/scripts_printer/data_ld/allgemein/kontrollstreifen
/cfast_go.txt
Scripts/scripts_printer/data_ld/allgemein/kontrollstreifen
/cslow_go.txt
Scripts/scripts_printer/data_ld/motore/MO04kupl.txt
Size 4x6 slow, without pressure, roller
adjustment
Size 4x6 with pressure by LD
Light sensor test
Version check LD and RSD
Control strip test, quick
Control strip test, slow
Test magnetic clutch
AGFA d-lab.3 2001-01-02 /PN 9009 6.4.61