AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Replacing the Laser Power Supply Unit
Allan key 3,0
Dismount the laser power supply unit:
− Disconnect the cables:
1. Power cable for the laser 220 V on the right
side of the Printer power supply unit
(2 screws)
2. Cable on the power supply unit
3. Remote on PO_GS01
− Unscrew the laser power supply unit (4 screws)
and remove it
dlabr170
Replacing LA_GS01 LFB-Distributor
LFB = Laser Feedback
− Remove LA_GS01 (1):
The GS is held at the back in 2 holders and is
only locked in at the front.
dlabrf48
Replacing LA_GS07 Polygon Drive
− Remove the GS: 4 screws
Make sure that the screws do not fall into the
printing roller!
dlabrc48
AGFA d-lab.3 2001-01-02 /PN 9009 6.4.51