AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Fibre (1)
General view
Front view
dlabr107
Top plan view
dlabr157
dlabr155
Power meter (e.g. Ophir Nova with filter or monitor
diode in the laser scanning module)
2 Allan keys, size 2
− Completely unscrew the small Allan screw (5)
− Slacken the pressure screw on the laser side until
the fibre can be pulled out
− Slacken the pressure screw on the exit side until
the fibre holder can be pulled out
− Put the fibre in the fibre holder in such a way that
the pin on the fastening ring (4, no fig.) fits in the
corresponding recess in the fibre holder
− Mount the fibre holder with the fibre in the new
laser
− Tighten the pressure screws:
1. Up to the stop position
2. Slacken one turn
dlabr156
AGFA d-lab.3 2001-01-02 /PN 9009 6.4.49