AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Replacing the Laser Module / Laser
Warning!
A laser beam of class 3B may be accessible after
the removal of covers.
Be sure to keep the mechanical laser shutter on
the fibre coupling closed when working on the
laser.
Looking directly into lasers of class 3B is
dangerous and can always hurt the eyes.
Make sure during maintenance and repair work that
the laser beam is not reflected into the eyes by parts
or tools.
Caution!
The assembly group should never be opened. The
Laser fibre cable is rigidly coupled with the Laser
module. It must only be disconnected on the laser
head itself.
The following parts can be replaced:
− Laser module 4.4150.1000
− Laser
7.8060.LUD0
− Laser power supply unit 7.8060.LUC1
− PE_GS01 (3) Distributor board 8.8060.2170
− LA_GS07 Polygon drive (4) 7.4150.1558
− LA_BE04 AOM green (5) 8.4150.1330
− LA_BE04 AOM blue (6) 8.4150.1330
Not replaceable:
− LA_GS06 (1)
− LA_GS05 (2)
dlabrx48
AGFA d-lab.3 2001-01-02 /PN 9009 6.4.45