AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Replacing the Sync Disks 7.8060.TUBH. / outer Toothed Belt 7.0389.6121.
Dynamometer
Seeger circlip ring pliers 3 – 10 mm ∅
− Remove the Seeger circlip ring
− Replace the sync disks (1) and (3):
The collar of the sync disks must be alternately
on the belts. Risk of confusion!
− Adjust the belt tension (2) by shifting the
tensioning plate:
The screw heads (4) to fasten the tensioning
plate must not be on the belt side!
dlabr207
Measure the belt tension in position (2):
1 Sync disk, flange out
2 Test point of the belt tension
3 Sync disk, flange in
4 Screw head not on the belt side
− Deflection of the toothed belt: 1,7 mm
− Test load: 1,0 N
AGFA d-lab.3 2001-01-02 /PN 9009 6.4.25