18.06.2014 Views

AGFA d-lab.3 Digital Compact Lab

AGFA d-lab.3 Digital Compact Lab

AGFA d-lab.3 Digital Compact Lab

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Printer<br />

Repair<br />

Replacing the Switching Gear SG<br />

Replacement required:<br />

The ML/MR → Sheet Bridge (SB) transfer does not<br />

work<br />

The assembly group has to be removed from the<br />

Printer for all jobs on the SG.<br />

Allan key<br />

Removal:<br />

− Remove Switching Gear (1):<br />

Pull the left bracket vigorously as the assembly<br />

group is very tight in the guide.<br />

Installation:<br />

− When mounting the assembly group, make sure<br />

that the guides lock under the pins with the<br />

springs.<br />

− The connector for the SG is located on the fan<br />

assembly group<br />

1<br />

d<br />

labr146<br />

Replacing the Printed Circuit SG_GS02<br />

Replacement required:<br />

If the SG_GS02 is defective, the paper cannot be<br />

turned round any more.<br />

Allan key 2,5<br />

Back of SG_GS02:<br />

Unscrew 3 Allan screws 2,5<br />

Caution!<br />

Mind the code disk .SGBE of the motor upon the<br />

removal / installation!<br />

6.4.18 2001-01-02 /PN 9009 <strong>AGFA</strong> d-<strong>lab.3</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!