18.06.2014 Views

AGFA d-lab.3 Digital Compact Lab

AGFA d-lab.3 Digital Compact Lab

AGFA d-lab.3 Digital Compact Lab

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Repair<br />

Printer<br />

− There may be different versions of the Printer<br />

Mainboard (GS01) in the d-lab:<br />

L8.8060.2000.X only for d-<strong>lab.3</strong><br />

(X stands for a letter, no LED display)<br />

- L8.8060.2000.0 only for d-<strong>lab.3</strong><br />

- L8.8060.2340.0/1 only for d-lab.2<br />

- L8.8060.2340.2 for d-lab.2/3 and net-lab.12<br />

How this depends on the software is described in<br />

the section Software Transmission.<br />

Save setup values (if still possible)<br />

Usually it will not be possible any more to read out<br />

the setup values.<br />

Setup values are stored in the following locations:<br />

− In the folder C:\DLAB\D-lab Version\ Logfiles,<br />

File: printer_setup_protokoll.txt<br />

− Diskette enclosed with the shipment,<br />

File: printer_setup_write.txt<br />

Attention:<br />

The original setup values have probably been<br />

changed since production start at the customers’.<br />

This was necessary if assemblies were replaced or<br />

machine parameters were optimized. If the data,<br />

changed meanwhile, have not been saved the two<br />

files still contain the original data, i.e. as they were<br />

at the time of shipment.<br />

If saving is still possible then:<br />

− Change in the program to Service GUI<br />

− Execute the script scripts for<br />

service/setup/<br />

printer_setup_backup.txt. The script<br />

printer_setup_write.txt<br />

is automatically created and saved in the same<br />

script folder. The file contains all setup values of<br />

the Printer and the AOM LUT.<br />

This script is used to restore the setup values<br />

after replacement of the GS01.<br />

<strong>AGFA</strong> d-<strong>lab.3</strong> 2001-01-02 /PN 9009 6.4.3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!