AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Removal, Installation, Adjustment
The repair instructions describe the individual
assembly groups in the order of the paper advance.
The following data / worksteps are stated for each
part to be replaced:
Cause for the replacement
Required tool
Prerequisites (if necessary)
These worksteps have to be carried out prior
to the removal.
Removal / Installation
Install the assembly groups in reverse order.
The installation is only described separately
if the removal instructions are not detailed
enough.
Adjustment (if necessary)
AGFA d-lab.3 2001-01-02 /PN 9009 6.4.1